Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 190mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke190 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM
Round-end CM back cover on the MAC32X190SCM lets the 32 mm cylinder sit in a pivoted lug without adapter plates, while the riveted stainless barrel and hard-chrome plated 12 mm rod resist corrosion in humid or lightly washed areas. Air drives the piston both ways and a variable cushion at each end soaks up end-of-stroke shock at speeds up to 800 mm/s.
At 0.5 MPa the bore delivers 402 N of push and 346 N of pull; budget about 241 N for real work, or expect roughly 20 kg of vertical lifting once a 2:1 margin is applied. Pressure range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), and the standard magnet drops straight onto CMSG or DMSG switches.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM Is Used
Lid clamp on a mixing vessel
A round-end lug on the vessel clamp swings the 32 mm bore force, 402 N at 0.5 MPa, to lock hygiene lids between batches.
Pusher on a bakery conveyor
Rounds trays off the belt into a lane; the dual cushion stops 190 mm of travel without hammering the covers.
Die positioning wedge
Drives a wedge that seats small stamping dies, with 345.6 N of pull retracting the wedge for die changes.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM the Right Cylinder?
Compare down and up before ordering: 25 mm gives 245 N at 0.5 MPa for lighter jobs, 40 mm lifts to 628 N, and this 32 mm barrel lands at 402 N - usually the right middle choice for 190 mm strokes. The piston holds no position when the valve centres; specify a rod lock or check valve for hanging loads. The CM round-end cover pairs with SDB pivot brackets, and the standard magnet means position switches ship with the cylinder, not as an add-on.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM FAQ
Push is 402.2 N and pull 345.6 N at 0.5 MPa, rising to 563.0 N push and 483.8 N pull at 0.7 MPa; the theoretical ceiling is 82 kgf at 1.0 MPa. Ports are 1/8" and the rod is 12 mm chromed steel.
Yes - every MAC cylinder carries a built-in magnet as standard, so CMSG, DMSG and EMSG reed or electronic switches clip on the barrel at any point along the 190 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X190SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.