Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 195mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke195 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA
Deep slots, tall stacks and long index moves suit the MAC32X195SCA: 195 mm of stroke in AirTAC's riveted stainless round-body format, finished with a CA pivot back cover for swinging mounts. Double acting with a variable cushion at each end, it pushes 402 N and pulls 346 N at 0.5 MPa while the needle screws let you trim impact at both stops.
Scale the force to the job: about 241 N of practical working force at 0.5 MPa, or roughly 20 kg vertical lifting with a 2:1 margin (41 kg theoretical). Operating pressure spans 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, and the built-in magnet drives CMSG, DMSG or EMSG switches without special ordering.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA Is Used
Deep-rack gate cylinder
Opens tall pick-module gates across 195 mm, pivoting on the CA cover so the swing tracks the gate arc.
Stretch-wrap turntable latch
Holds and releases the turntable lock with 402 N of push at 0.5 MPa, retracting fully for film changes.
Punch press feed slide
Feeds blanks 195 mm into a small press die; external guides keep the 12 mm rod side-load free.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA the Right Cylinder?
Step down to 25 mm for 245 N at 0.5 MPa or up to 40 mm for 628 N; at 402 N this 32 mm bore covers mid-range thrust with room for pressure dips. At 195 mm the rod is well extended, so support long workpieces or add external guides to protect it from bending. A cushion never holds position - with air vented the rod creeps, so use a rod lock or pilot check valve when the load must hang. Magnet, CA pivot cover, FA/LB/SDB mounts and I/Y knuckles all match this code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA FAQ
Push 402.2 N and pull 345.6 N at 0.5 MPa; push 563.0 N and pull 483.8 N at 0.7 MPa; 82 kgf theoretical maximum at 1.0 MPa. Proof pressure is 1.5 MPa (215 psi) and the speed range is 30-800 mm/s over the 195 mm stroke.
No - the variable air cushion only slows the piston near the ends; with air removed the rod drifts freely. For hanging or clamped loads that must stay put, add a rod lock cylinder or a pilot-operated check valve in the line.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X195SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.