Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 225mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA
Need pivoting mount work at mid force? The MAC32X225SCA carries a CA pivot back cover on a 32 mm cushioned bore that pushes 402 N and pulls 346 N at 0.5 MPa, rising to 563 N and 484 N at 0.7 MPa (82 kgf theoretical ceiling). Both ends carry a variable air cushion, so faster 30-800 mm/s cycling does not hammer the aluminium covers.
The rolling-packed stainless barrel resists corrosion in wet or outdoor spots where painted bodies fail, and the standard-fit magnet means DMSG or EMSG switches mount straight onto the tube. Halving the push force gives a practical vertical-lift figure: this cylinder raises about 20 kg with a 2:1 margin, or 41 kg at the limit.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA Is Used
Tilt-tray linkage
Swings a sorting tray through its pivot arc on a distribution line; the CA pivot pin mounts straight to the linkage with no adapter bracket.
Bench press ram
Drives a light press-fit ram for bushings and bearings on an assembly bench, the cushioned landing protecting small dies at speed.
Wash-tank lid lift
Raises a heavy wash-tank lid on a pivot linkage in a wet processing room, where the stainless body shrugs off constant splash.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA the Right Cylinder?
Compare before committing: a 25 mm MAC makes 245 N at 0.5 MPa, this 32 mm bore 402 N, and the 40 mm bore 628 N - pick the smallest that clears your load with margin. Expect the rod to move freely if supply air drops; position holding needs a pilot-operated check or rod lock, since the air cushion only softens the last millimetres of stroke.
The CA pivot pin suits linkage work; add SDB pivot bracket or FA flange where the frame demands it, and the built-in magnet feeds DMSG switches at either end of travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa, 563 N and 484 N; theoretical maximum is 82 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with speeds of 30-800 mm/s.
They are variable at both ends: back the needle screws fully out before first run, then close them gradually until end-of-stroke bounce disappears, letting you raise cycle speed toward 800 mm/s without hammering the covers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X225SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.