Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 340mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke340 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU
Pushing 402 N and pulling 346 N at 0.5 MPa, this 32 mm bore MAC covers slides and clamps that need mid-range force over a 340 mm stroke. Being double acting, air both extends and retracts the rod, while the variable cushion at both ends lets you tune the stop to the load.
Buyer math: 402 N divided by gravity is about 41 kg of lift, so with a 2:1 margin it raises roughly 20 kg vertically - handy when matching a tray, fixture or gate weight. The stainless tube and chrome-plated rod also make it a natural pick wherever splashes or humidity would rust a painted body.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 340 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×340 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU Is Used
Clarifier sluice gate
Part-opens a slide gate on a small wastewater channel; 402 N of push at 0.5 MPa moves a light gate against head pressure.
Tray sealer clamp
Presses a sealing head onto ready-meal trays, where the variable cushion keeps the downstroke from marking thin film.
Sample bottle stoppering
Drives a stopper ram on a benchtop bottling rig, lifting about 20 kg vertically with a 2:1 margin on the 402 N rating.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU the Right Cylinder?
Size down to 25 mm (245 N push at 0.5 MPa) for lighter clamps or up to 40 mm (628 N) when the job stiffens; 32 mm splits the difference with 402 N. Do not count on the cylinder to park a load: once air bleeds away the piston drifts, so a rod lock or check valve is needed at held stations. Every unit carries a standard magnet for CMSG, DMSG or EMSG switches, and the U flat-end rear cover pairs cleanly with LB foot or FA flange plates. Over 340 mm of stroke any misalignment multiplies, so couple through an I or Y knuckle or rail-guide the load to keep bending off the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU FAQ
Expect 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and up to 82 kgf theoretically at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) of 40 um filtered air, keep speed between 30 and 800 mm/s, and the 1.5 MPa (215 psi) proof rating covers surges.
The rolled stainless tube and hard-chrome plated rod need no paint to survive washdown, humidity or outdoor duty, so the MAC32X340SU keeps sealing reliably in food lines and damp plants where coated aluminium bodies flake and corrode.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X340SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.