Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM
Round stainless barrel, rolled aluminium covers, 350 mm of cushioned travel - the MAC32X350SCM packages mid-range muscle in a compact round body. Double acting by design, it pushes 402 N and pulls 346 N at 0.5 MPa and cushions at both ends to tame fast stops.
Its CM round-end cover keeps the back of the cylinder tidy for tight mounts, and the built-in magnet means position feedback is a clip-on switch, not a special order. Halve the theoretical 41 kg lift figure and you still raise about 20 kg vertically, which is a practical yardstick for real part weights.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM Is Used
Die ejector on a small press
Kicks finished brass bushings clear of a compact die, where 402 N of push at 0.5 MPa is comfortably above the ejection load.
Tote lane stop
Pops up to arrest totes on a gravity flow rack aisle; the round barrel sits flush between the rails in tight pitch.
CNC guard slide
Slides a chip-guard panel open between cutting cycles, with the cushion easing the panel home at each end of 350 mm.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM the Right Cylinder?
Need less? The 25 mm bore pushes 245 N at 0.5 MPa. Need more? The 40 mm bore delivers 628 N. At 402 N, this 32 mm unit covers the middle ground over 350 mm of travel, breathing through 1/8 inch ports with an M10x1.25 rod thread. The MAC cannot lock mid-stroke when pressure is lost - a pilot-operated check valve on the ports is the usual fix for loads waiting under gravity. The CM round-end cover keeps the rear face compact, and SDB pivot brackets or FA flange and LB foot plates bolt on as the frame demands; rail-guide long strokes like this so side load never reaches the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM FAQ
Push is 402 N and pull is 346 N at 0.5 MPa; at 0.7 MPa push reaches 563 N, with 82 kgf as the theoretical maximum at 1.0 MPa. It accepts 0.15-1.0 MPa (22-145 psi) working pressure, 1.5 MPa (215 psi) proof, and runs 30-800 mm/s with two-way cushioning.
The rounded rear keeps the cylinder profile flush in tight frames and pairs with the standard FA flange, LB foot and SDB pivot brackets, so you can fix or hang the 350 mm stroke unit without machining adapters around a projecting cover.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X350SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.