Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB
Pivot mounting straight out of the box is the point of the MAC32X50SCASDB: a cushioned 32 mm bore, 50 mm stroke double-acting cylinder with the SDB pivot bracket paired to its CA back cover. Push force is 402.2 N at 0.5 MPa and pull is 345.6 N, with a variable air cushion easing both ends of travel.
Because the bracket ships fitted, the cylinder can swing through an arc on a machine pin without custom clevis work. The riveted stainless barrel and hard-chrome rod cope with condensation and light washdown, and the magnet built into every MA piston supports CMSG, DMSG and EMSG switches from day one.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB Is Used
Grain chute deflector
Swinging a deflector plate to split grain flow between two silo inlets, the fitted SDB bracket handling the pivoting duty.
Weld jig swing clamp
Swinging a clamp arm into position on a tube welding fixture, then clamping with the full 402.2 N push stroke.
Stacker position confirm
Extending a feeler on an ASRS lift mast; a DMSG switch on the standard magnet confirms full extension to the PLC.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB the Right Cylinder?
Compare across the range at 0.5 MPa push: 245.3 N on a 25 mm bore, 402.2 N here, 628.3 N on a 40 mm bore - pick the next size up if your duty creeps past the roughly 241 N this bore supports for continuous work. Remember the rod is not locked when air is removed; it will drift under load unless you add a rod lock or pilot check valve. Ports are 1/8" on a 12 mm rod with M10x1.25 thread; FA flange and LB foot options remain if a future rework outgrows the pivot bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa, 563.0 N push and 483.8 N pull; theoretical maximum 82.0 kgf at 1.0 MPa. Supply is 0.15-1.0 MPa (22-145 psi) filtered to 40 um, speed 30-800 mm/s, with a variable air cushion at both ends and 1/8" ports.
The SDB pivot bracket mounts on the cylinder body, so the whole unit articulates on a machine pin while the CA back cover still takes a clevis pin. You skip fabricating a custom swing mount, and if the layout changes, FA flange or LB foot hardware swaps straight on.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X50SCASDB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.