Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA
With a 600 mm stroke and a 32 mm bore, this MAC gives you 402.2 N of push at 0.5 MPa and 563.0 N at 0.7 MPa - enough to eject, clamp or index parts across a long reach. In practice, budget around 241 N of real work at 0.5 MPa so the cylinder never runs at its ceiling; that margin also buys smoother speed control across the 30-800 mm/s range.
The round stainless barrel with its hard-chrome plated rod shrugs off washdown and damp shops far better than painted minis, and the riveted aluminium covers keep the body sealed. A variable air cushion at both ends lets you bleed off end-of-stroke shock, and the built-in magnet (standard) accepts CMSG / DMSG / EMSG switches out of the box. The CA pivot back cover suits pivoting mounts, and the 600 mm stroke is made to order since 500 mm is the catalogue maximum.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA Is Used
Long-Reach Ejector
Kicks cartons off the far lane of a packaging conveyor, with the CA pivot taking up stroke misalignment over the full 600 mm travel.
Lab Gate Actuator
Swings the access gate on a fume hood or cleanroom pass-through, where the stainless barrel stands up to daily wipe-downs.
Textile Shedding Lever
Drives a long-travel harness lever on a weaving machine, with both air cushions stopping the frame without slam at high cycles.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA the Right Cylinder?
If 402 N at 0.5 MPa is more than the job needs, the bore 25 MAC gives 245.3 N; if you need more, step up to bore 40 for 628.3 N at the same pressure. Remember that a plain MAC drifts the moment air is removed - the cushion is not a lock - so fit a rod lock or pilot check valve if the rod must hold position mid-stroke. Pair the CA pivot cover with an SDB pivot bracket or LB foot from the mounting list, and keep side loads off the 12 mm rod: at 600 mm of travel, guide the load externally rather than on the piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N; at 0.7 MPa those rise to 563.0 N and 483.8 N. The bore reaches a theoretical 82 kgf at 1.0 MPa. Double-acting, 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, with a variable air cushion at each end.
CA is a pivot back cover - the cylinder pivots in service, which absorbs alignment error on long strokes like this 600 mm. Add an SDB pivot bracket or LB foot if you need a frame attachment, and note the 600 mm length is made to order, above the 500 mm standard cap.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.