Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM
Long travel with mid-range muscle: at 0.5 MPa the 32 mm piston delivers 402.2 N on the extend stroke and 345.6 N retracting, rising to a theoretical 82 kgf at 1.0 MPa. Working around 241 N keeps the cylinder in its comfort zone, and a 20 kg vertical lift falls well inside a 2:1 margin.
CM round-end back covers give a clean, fixed stud face, so the MAC bolts flush into a machine plate without extra adapters. The stainless tube and chrome-plated 12 mm rod handle splash and condensation that would corrode painted minis, while the twin needle screws of the variable air cushion tame the end-of-stroke energy on a 600 mm run. The piston magnet is fitted as standard for CMSG, DMSG and EMSG switches, and the 600 mm stroke is a made-to-order length above the 500 mm catalogue cap.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM Is Used
High-Bay Door Pusher
Slides a tall storage rack door across its track; 402 N at 0.5 MPa moves the leaf and the CM face bolts flat to the frame.
Pallet Diverter
Pushes pallets between roller lanes in a distribution centre, with the 600 mm made-to-order stroke crossing a full lane width.
Bottle Filler Indexer
Advances a bottle rail one pitch per cycle on 40 um filtered air, with DMSG switches confirming home and end positions.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM the Right Cylinder?
Downsize to bore 25 if 245.3 N at 0.5 MPa covers the load; upsize to bore 40 (628.3 N) when you want a bigger reserve. With no air applied the rod moves freely - the cushion is not a brake - so add a pilot check valve or rod lock where the load must stay put. The CM round-end cover takes a fixed face mount, with FA flange, LB foot or SDB pivot available if the machine layout demands. Watch side load on the 12 mm rod at 600 mm of travel; external linear guiding keeps the tube and seals alive.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM FAQ
Push is 402.2 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa expect 563.0 N push and 483.8 N pull. Theoretical maximum at 1.0 MPa is 82 kgf. Supply filtered air at 0.15-1.0 MPa (22-145 psi); proof pressure is 1.5 MPa (215 psi).
CM presents a round, fixed end that bolts flat into a machined seat - useful on this long 600 mm body where pivots would add wobble. The stainless barrel and chrome rod handle washdown, and the standard magnet pairs with CMSG, DMSG and EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.