Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU
Even at a working 0.5 MPa - half the 1.0 MPa ceiling - the rod still delivers 402.2 N of push, tapping close to the bore's theoretical 82 kgf. Keep real loads near 241 N and the cylinder will hold speed and seal life far longer across its 30-800 mm/s range.
The U flat-end back cover presents a flat, fixed face for direct mounting to a machine member - no pivot, no adapter. A 20 kg vertical lift at 0.5 MPa leaves a 2:1 margin, handy for raising gates or counterweighted slides. Stainless barrel plus a 20 um hard-chrome rod stands up to washdown and rain, the double-acting design with a variable cushion soaks up end-of-stroke shock at both ends, and the standard-built magnet feeds CMSG / DMSG / EMSG switches. At 600 mm the stroke exceeds the 500 mm standard cap, so it ships as a made-to-order length.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU Is Used
Trim Press Feed Slide
Feeds blanks across a 600 mm trim press table; the U flat-end face bolts straight to the slide without adapters.
Machine Hatch Lifter
Raises a counterweighted guard hatch of about 20 kg, keeping a 2:1 lift margin at 0.5 MPa for smooth, reliable opening.
Robot Cell Safety Gate
Drives a sliding perimeter gate on a welding robot cell, with EMSG switches wired into the interlock loop at both ends of travel.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU the Right Cylinder?
Bore 25 offers 245.3 N at 0.5 MPa if you are over-specced; bore 40 lifts the push to 628.3 N when more force is needed. This cylinder will not hold its stroke against gravity once air is vented - plan a rod lock or pilot check valve into the circuit. The U flat-end cover mounts flush to a plate; FA flange, LB foot and SDB pivot round out the options. On a 600 mm stroke, keep external guides close to the load so the hard-chrome rod never sees bending loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU FAQ
402.2 N push and 345.6 N pull at 0.5 MPa; 563.0 N push and 483.8 N pull at 0.7 MPa; 82 kgf theoretical at 1.0 MPa. It is double-acting on filtered air at 0.15-1.0 MPa (22-145 psi), running 30-800 mm/s.
Yes - the stainless round barrel and 20 um hard-chrome rod cope with rain and condensation that rust painted minis, and the U flat end gives a fixed, flat mounting face. Remember the cylinder cannot hold load without air; a rod lock or pilot check valve handles that job.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X600SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.