Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU
Washdown lines and outdoor rigs are where the MAC32X60SU earns its keep: the stainless round barrel resists the rust that kills painted mini cylinders, and 20 um hard-chrome plating keeps the 12 mm rod from scoring. Its U flat-end back cover presents a flat, fixed mounting face - the simplest choice when the cylinder bolts solid and nothing rocks.
Force-wise the double-acting piston pushes 402.2 N at 0.5 MPa (72.5 psi) and pulls 345.6 N, climbing to 563.0 N push at 0.7 MPa. Treat 241 N as the honest working figure at 0.5 MPa and the cylinder will live a long service life. Variable air cushioning at both ends lets you dial out end-of-stroke shock as speeds climb anywhere in the 30-800 mm/s window.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU Is Used
Rinse-line lid press on a dairy filler
Presses snap-on lids home through 60 mm in a wet zone the stainless barrel shrugs off, with no paint peel or rust bloom to contaminate product.
Case squaring pusher at a carton erector
Squares blank cases against the fence with 402 N of push; the flat U back cover bolts flush to the machine frame with zero bracket stack.
Presence-confirming wedge on a CNC fixture
A CMSG switch on the standard magnet confirms clamp state, while the cushioned stop protects the wedge seat at high cycle rates.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU the Right Cylinder?
Sitting between the 25 mm bore (245.3 N at 0.5 MPa) and the 40 mm bore (628.3 N), this 32 mm unit suits medium-duty grips and pushers. For anything that must stay extended through a power cut, spec a rod lock or pilot check valve - the cushion is a damper, never a lock. If a pivoting mount appears later, the CA or CM back cover swaps in; FA flange and LB foot brackets bolt onto this same U-end body, and the standard magnet keeps sensor retrofits simple.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU FAQ
Push 402.2 N and pull 345.6 N at 0.5 MPa; push 563.0 N and pull 483.8 N at 0.7 MPa; 82.0 kgf theoretical maximum at 1.0 MPa. Working pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s.
The flat U face is the fastest way to bolt the cylinder solidly to a bracket or machine wall with no pivot hardware in the way. It keeps the same riveted stainless body, 1/8" ports, M10x1.25 rod thread and built-in magnet as every other MAC32 variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.