Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 650mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke650 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM
Designed for long pushes, the MAC32X650SCM runs a 12 mm hard-chromed rod out to 650 mm - a made-to-order stroke, since the standard MAC list for a 32 mm bore stops at 500 mm. Double acting by design, it delivers 402 N of push at 0.5 MPa and pulls back with 346 N, while variable air cushions at both ends tame the arrival of the moving mass.
Its CM round-end back cover presents a smooth nose that seats in a machined pocket or on an SDB pivot bracket when clearance is tight. The rolled stainless barrel and grease-retaining two-way piston seal hold friction stable through millions of cycles in dusty workshops. Treat 402 N as a ceiling: a realistic 60% duty leaves about 241 N of continuous push, ample for a 24 kg sliding drawer, while a vertical fit raises some 41 kg - budget 20 kg if you want the 2:1 reserve. A magnet sits inside every piston, ready for CMSG and EMSG position switches.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM Is Used
Deep-shelf tote ejector
Ejecting a 20 kg tote from a 650 mm deep pick face in a goods-to-person buffer, with the cushioned return stopping the next tote from shifting.
Web tension dancer
Trimming dancer-arm position across a 650 mm traverse on a label-printing line, the 346 N pull holding web tension steady at 60 m/min.
Wash-bay sluice plate
Raising and lowering a stainless sluice plate in a parts-wash bay, where the chromed rod and steel barrel shrug off daily splash.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM the Right Cylinder?
For 650 mm strokes the neighbours matter: a 25 mm bore offers 245 N at 0.5 MPa and a 40 mm bore 628 N, so choose this 32 mm when the duty lands near 240 N of working load. It will not park a load on its own - expect drift whenever air pressure is removed - so add a check valve or rod lock to hold position. Guide long strokes externally; the 12 mm rod is not meant to carry side thrust. Ports are PT blank as delivered, with G or NPT threads selectable at order time.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM FAQ
402 N push / 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and 82 kgf theoretical maximum at 1.0 MPa. Also: 32 mm bore, 12 mm rod, 1/8" port, M10x1.25 male rod thread, speed 30-800 mm/s, working pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi).
The precision stainless tube resists corrosion in damp or lightly washed environments without paint to flake, and the 20 um hard-chrome plating on the 12 mm rod keeps seal wear low. It is a riveted round-body construction with rolled covers, so the joints stay tight cycle after cycle.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X650SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.