Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 65mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA
Short, punchy and pivot-ready, MAC32X65SCA delivers 402.2 N of push and 345.6 N of pull at 0.5 MPa on a 65 mm stroke, climbing to 563.0 N at 0.7 MPa. Its rolling-packed round body - stainless barrel, hard-chrome rod, aluminium covers - shrugs off the splash zones that eat painted minis. In vertical terms, the bore carries about 41 kgf at 0.5 MPa, so lifting a real part of roughly 20 kg keeps a comfortable 2:1 margin. A variable air cushion at each end absorbs the snap of fast ejection moves.
The 65 mm stroke sits inside the standard range for this bore. CA pivot eyes on the back cover let the cylinder swing with a lever or linkage, no adaptor plates required. The magnet comes built in as standard, so CMSG, DMSG and EMSG switches drop straight on for end-of-stroke signalling.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA Is Used
Die ejector
Kicks small stamped parts clear of a press die in milliseconds, the dual cushion damping the return seat.
Swing clamp
Clamps brackets on an assembly fixture through a pivot linkage, holding about 20 kg-class parts with margin to spare.
Carton kick-off
Deflects cartons off a sorter belt at 30-800 mm/s, with the stainless barrel coping around wet label stations.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA the Right Cylinder?
If 402 N at 0.5 MPa oversizes the job, the 25 mm bore pushes 245.3 N; if it undersizes, step up to 40 mm for 628.3 N. Remember the piston floats when the valve centres - a pilot check valve or rod lock holds a clamped part, not the cushion. The CA pivot suits swing clamps and toggle linkages, while FA flange or LB foot brackets handle fixed mounts; 1/8" ports and the standard magnet keep plumbing and sensing simple.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA FAQ
Push is 402.2 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa those figures become 563.0 N push and 483.8 N pull. Maximum theoretical force at 1.0 MPa is 82 kgf. Operating pressure spans 0.15-1.0 MPa (22-145 psi) and piston speed 30-800 mm/s.
No. Every MA-series cylinder, this one included, ships with the piston magnet already fitted as standard. AirTAC CMSG, DMSG and EMSG reed or electronic switches mount directly on the stainless barrel to signal rod position, so no special-order piston or retrofit magnet is ever required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X65SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.