Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 700mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke700 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA
Seven hundred millimetres of travel sits well past the 500 mm catalogue limit, so the MAC32X700SCA is built to order on the 32 mm double-acting body with variable air cushions at both ends. Force is unaffected by length: 402.2 N push and 345.6 N pull at 0.5 MPa, rising to 563.0 N and 483.8 N at 0.7 MPa.
The CA pivot back cover is the reason to pick this variant for a long stroke - linkages and lever arms articulate through the full 700 mm without a bracket stack. Keep the 12 mm hard-chrome rod clear of side load and the riveted stainless barrel will handle damp or outdoor air with ease. On the numbers: 402.2 N over gravity gives a 41 kg theoretical vertical lift, and halving that leaves about 20 kg of practical hoisting capacity.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA Is Used
Hopper gate lever
A pivoting lever arm opening a hopper outlet, where the CA eye takes the swing and the cushion keeps the 82 kgf-class force from cracking the gate.
Press-die part ejection
Kicking deep-drawn shells out of a long die shoe, with 402 N of push and the piston cushioning before the mechanical stop.
Case elevator linkage
Raising cases between two packaging levels through a four-bar linkage, sized around a 20 kg vertical lift with a 2:1 margin.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA the Right Cylinder?
Both neighbours bracket this bore: 25 mm gives 245.3 N at 0.5 MPa and 40 mm gives 628.3 N. Length does not change force, only the guidance it needs - keep the load externally slid and the thrust axial on a 700 mm rod. A MAC has no built-in brake, so a de-energised valve lets the load sink; fit a rod lock or pilot check valve for hanging work. FA flange or LB foot mounts steady the long body, and the standard magnet supports CMSG / DMSG / EMSG switches throughout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA FAQ
It delivers 402.2 N push and 345.6 N pull at 0.5 MPa, 563.0 N push and 483.8 N pull at 0.7 MPa, and a theoretical maximum of 82 kgf. The 700 mm stroke is made to order, ports are 1/8", the rod is 12 mm with an M10x1.25 male thread, air supply is 0.15-1.0 MPa (22-145 psi), and speed runs 30-800 mm/s from -20 to +70 C.
The CA cover provides an integral pivot eye, so a 700 mm linkage or lever can swing through full travel without stacking brackets on a plain cover. FA flange, LB foot and SDB mounts remain available, and the standard magnet still accepts CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.