Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH
Buyers comparing the MAC32X75SCAH with the plain SCA will find the same 32 mm double-acting core: 75 mm of travel, cushions at both ends, and a CA pivot eye on the back cover. Force stays 402.2 N push and 345.6 N pull at 0.5 MPa, peaking theoretically at 82 kgf, so budget about 241 N of genuine work - around 20 kg lifted vertically with a 2:1 cushion. The trailing H is an option code, so confirm its exact meaning from the datasheet before you order.
Inside, the stainless barrel, riveted aluminium covers and hard-chrome plated 12 mm rod form the standard MA construction that handles humidity and light washdown. The heterogeneous piston seal stores its own grease, cutting maintenance intervals on high-cycle machines. A magnet is included as standard for CMSG, DMSG or EMSG switches, and supply can span 0.15-1.0 MPa (22-145 psi) with speeds from 30 to 800 mm/s.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH Is Used
Second-operation lathe feed
Feeds a small slide on a second-operation lathe, with cushions softening the stop at each end of the 75 mm cycle.
Filling machine lid press
Presses snap-on lids on a compact filling machine, applying about 241 N of controlled working force through the press head.
Checkweigher reject pusher
Kicks underweight packs off the checkweigher belt; the CA pivot eye links the pusher arm and the magnet signals home.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH the Right Cylinder?
Against the family: 25 mm push at 0.5 MPa is 245.3 N, this unit 402.2 N, and 50 mm jumps to 981.3 N with a 1/4" port, so there is headroom above if loads grow. Pressure window 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s. This barrel does not hold position on air loss - the piston drifts, so spec a rod lock or pilot check valve where a stopped arm must stay stopped. Confirm the H suffix meaning from the datasheet, then choose FA flange or LB foot brackets if fixed mounting beats the CA pivot eye for your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH FAQ
You get 402.2 N push and 345.6 N pull at 0.5 MPa, 563.0 N push and 483.8 N pull at 0.7 MPa, and a theoretical peak of 82 kgf at 1.0 MPa. Ports are 1/8", the rod thread is M10x1.25, and the rod measures 12 mm with hard chrome plating.
Bore, stroke, forces and construction are identical - 402.2 N push at 0.5 MPa, a stainless riveted barrel and a CA pivot eye. The extra H is an ordering-code option whose exact scope should be confirmed from the datasheet before purchase. Both versions carry the standard built-in magnet for CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X75SCAH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.