Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø40mm bore and 210mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ40 mm
- Stroke210 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM12×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU
Built around a riveted stainless round barrel, this 40 mm bore MAC reaches 210 mm of stroke while pushing 628.3 N at 0.5 MPa. Double acting as standard, it carries a magnet in the piston from the factory, so CMSG, DMSG or EMSG reed switches drop on without a special-order piston. Air cushioning at both ends is adjustable with the needle screws, and speeds of 30-800 mm/s are supported.
For vertical work the numbers are friendly: about 64 kgf of lift at 0.5 MPa, or roughly 32 kg kept under a 2:1 safety margin. The hard-chrome plated 16 mm rod, aluminium covers and 1/8" ports suit general plant air, and the U flat-end back cover mounts flush against a fixed face.
Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU Is Used
Multipack box elevator
Lifts multipacks of about 30 kg up 210 mm onto a palletising conveyor, sitting inside the roughly 32 kg vertical-lift figure at 0.5 MPa.
Cable drum guide
Moves a guide arm across a rewinding station to lay cable evenly; the flat-end U cover mounts flush on the machine frame without adapters.
Test cabinet door cycle
Opens and closes an environmental test chamber door in durability trials, cushioned at both ends for consistent 30-800 mm/s runs.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU the Right Cylinder?
Between a 32 mm bore (402.2 N push at 0.5 MPa) and a 50 mm bore (981.3 N), this 40 mm bore's 628.3 N covers most 200 mm-class transfer motions. With 210 mm of unsupported rod, mount the load on external guides - the 16 mm rod should carry thrust, not bending.
The U flat-end back cover presents a flat fixed face for direct bolting, with FA flange, LB foot or SDB pivot options for the frame. A centred valve leaves the rod free, so use a rod lock or pilot check valve when position must hold. Magnets are built in, so CMSG / DMSG / EMSG switches are a simple add-on.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU FAQ
0.5 MPa: 628.3 N push, 527.8 N pull. 0.7 MPa: 879.6 N push, 738.9 N pull. Theoretical maximum 128.1 kgf at 1.0 MPa. Over a 210 mm stroke that moves real loads - roughly 32 kg vertical once a 2:1 margin is kept.
A magnet is built into the piston as standard, so CMSG, DMSG or EMSG switches mount directly on the barrel without ordering a special cylinder. Extension, retraction and even intermediate stops can be signalled this way.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC40X210SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.