Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH is a genuine double acting + cushion standard round-body mini air cylinder with a Ø50mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH
Force first: at 0.5 MPa this 50 mm bore pushes with 981 N and pulls with 881 N, roughly a 100 kgf shove, climbing to 1374 N at 0.7 MPa. The MAC50X150SUH is double acting - air drives the rod both ways - and carries a variable air cushion at each end, so you can run the rod up to 800 mm/s and still arrive quietly. Supply 0.15-1.0 MPa (22-145 psi) of air filtered to 40 um.
Build quality is where it earns its keep: a stainless round barrel rolled onto aluminium covers, with a hard-chrome plated 16 mm rod that shrugs off washdown and humid air better than painted minis. The magnet comes fitted as standard, letting CMSG, DMSG or EMSG switches snap on for end-of-stroke sensing, while the U flat-end back cover mounts flush against fixed plates. For the 150 mm travel, keep the rod coupler aligned so side load never bends the 16 mm pin.
Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH Is Used
Carton push-off station
A 150 mm throw clears a full carton width off a packaging conveyor; 981 N at 0.5 MPa shoves loaded cases sideways without stalling.
Fixture lift in a weld cell
Halve the 100 kg push equivalent for a 2:1 margin and the rod lifts about 50 kg vertically - enough to index a small welding fixture.
Washdown gate actuation
The stainless barrel and chrome rod tolerate daily hose-down on food lines, opening a diverter gate between two filler lanes.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH the Right Cylinder?
Sizing check: one step down, a 40 mm bore of this family gives 628 N push at 0.5 MPa; one step up, the 63 mm bore reaches 1558 N. Sit at 589 N of usable push if you want margin on this 50 mm unit. Remember the cushion damps arrival but holds nothing - if the load must stay put on air loss, fit a pilot check valve or rod lock. Mount via FA flange, LB foot or SDB pivot bracket, or add an I/Y rod knuckle; the trailing H in the suffix is worth a quick confirm from datasheet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH FAQ
At 0.5 MPa: 981 N push and 881 N pull. At 0.7 MPa: 1374 N push and 1233 N pull. The theoretical maximum at 1.0 MPa is 200 kgf. It runs on 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s with 1/4" ports and a 16 mm rod with M14x1.5 male thread.
Yes. Every MAC cylinder leaves the factory with a magnet built into the piston, so CMSG, DMSG or EMSG switches mount directly on the barrel with no special-order piston and no retrofit work.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC50X150SUH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.