Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø50mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ50 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA
For a full 200 mm of powered travel, the MAC50X200SCA pairs bore 50 force with a long stainless barrel. It is double acting - compressed air both extends and retracts the 16 mm hard-chrome rod - and a variable air cushion at each end absorbs the shock of the long run. Output is 981.3 N at 0.5 MPa, the operating window is 0.15-1.0 MPa (22-145 psi), and rod speed spans 30-800 mm/s.
Roughly 589 N of that rating is the sensible number for continuous work, which translates to lifting about 50 kg vertically with a 2:1 margin - a real part weight you can match against a hopper gate or die slide. The riveted stainless round body keeps the long 200 mm barrel rigid and sealed in damp plants. Standard magnet, standard CMSG/EMSG switch fit, standard 1/4 inch ports.
Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA Is Used
Punch press slug ejector
Blows slugs clear of a punch die every stroke; the 200 mm reach clears the bolster and the cushion stops the rod whipping at the end of the hit.
Coffee-bean hopper gate
Modulates the outlet gate on a roastery hopper; about 50 kg of vertical lift opens even a full gate smoothly.
Stretch-wrapper pallet squarer
Squares a pallet before wrapping by pushing it flush against a stop; the long stroke crosses the full turntable width.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA the Right Cylinder?
Strokes between 185 and 200 mm all share this bore 50 force level, so pick the travel the mechanism actually needs rather than upsizing. Below it, a bore 40 MAC saves space at 628.3 N; above it, the bore 63 moves 1557.9 N at the same pressure. A 200 mm stroke on a 16 mm rod asks for external guides if the load can rack or twist. Air off means the piston drifts - the cushion is a shock absorber, never a brake - so add a rod lock or pilot check valve where a punch slide or gate must stay parked. FA flange, LB foot, SDB pivot and CA/U/CM back covers suit every frame layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA FAQ
At 0.5 MPa it pushes 981.3 N and pulls 880.8 N; at 0.7 MPa it pushes 1373.8 N and pulls 1233.1 N. The theoretical maximum at 1.0 MPa (145 psi) is 200.1 kgf. The 16 mm rod is threaded M14x1.5 and the ports are 1/4 inch.
The 200 mm barrel accepts FA flange, LB foot and SDB pivot brackets, with CA pivot, U flat-end or CM round-end back covers. The magnet is built in as standard equipment, so CMSG, DMSG and EMSG switches mount on the stainless tube without ordering a special piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC50X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.