Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 100mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH
Rugged and simple, MAC63X100SCAH pairs the 63 mm bore's 1558 N push (1457 N pull) at 0.5 MPa with a 100 mm stroke in a riveted, round stainless body. Air works both directions - double acting - and the variable cushions at each end absorb the shock of heavy stops. Before ordering, confirm the H suffix against the current AirTAC datasheet, as it sits outside the standard CA / U / CM back-cover list.
Work to roughly 874 N of pull at 0.5 MPa when sizing - about 60 percent of the retract rating - and count on around 79 kg of vertical lift capability from the push side with a 2:1 margin. The corrosion-resistant barrel and hard-chrome rod suit foundries, washdown food cells and outdoor gates alike, and the standard magnet takes CMSG / DMSG / EMSG switches as-is.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH Is Used
Heavy sliding gate drive
Pushes a roller gate across a warehouse dock; the 63 mm bore supplies the 935 N-class working push and the cushion damps the gate's final slam.
Materials test press ram
Cycles a compression jig in a materials lab; the 100 mm stroke accepts tall specimens and 2181 N push at 0.7 MPa covers coupons to a few hundred kgf.
Joinery clamp beam
Clamps glued panels on a joinery bench jig; the hard-chrome rod wipes clean of glue spatter and the tuned cushion seats the beam without jolt.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH the Right Cylinder?
Sizing in both directions: the 50 mm bore cuts force to 981 N push at 0.5 MPa, while 63 mm is already the top of the MAC range - heavier duty calls for a bigger series. Port size is 1/4" and the male rod thread is M14x1.5. With 100 mm of stroke the rod is exposed to bending, so guide the load on rails instead of letting the cylinder take side thrust. The trailing H in the code is not among the listed CA / U / CM covers, so confirm its meaning from the datasheet before placing the order.
If a load must stay in place through a power loss, note that this cylinder drifts when de-energised - add a rod lock or pilot check valve rather than relying on the cushion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH FAQ
Yes: push 1558 N and pull 1457 N at 0.5 MPa; push 2181 N and pull 2040 N at 0.7 MPa; theoretical maximum about 318 kgf at 1.0 MPa. The pressure envelope is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and speed spans 30-800 mm/s.
That suffix falls outside the standard CA pivot, U flat-end and CM round-end back-cover options, so confirm its exact meaning from the current AirTAC datasheet before ordering. The core build is unchanged: stainless barrel, hard-chrome rod, double-acting cushioned drive, and a standard magnet for CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X100SCAH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.