Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 110mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA
Pivot-mounted muscle in a round stainless body: the MAC63X110SCA pairs a 63 mm bore, the largest in this mini series, with 110 mm of stroke and a CA pivot back cover made for linkage mounts. Output is 1558 N push and 1457 N pull at 0.5 MPa, climbing to 2181 N at 0.7 MPa, with a 317.7 kgf theoretical ceiling. Double-acting by design, it cushions at both ends so a fast-moving lever arm never slams the covers.
Because the riveted stainless barrel and hard-chrome rod resist corrosion, this cylinder copes with coolant mist and outdoor dust that would chew up a painted mini. The magnet is built in as standard for CMSG, DMSG and EMSG switches. For sizing, halving the 1558 N rating still leaves about 79 kg of vertical lift capability - ample for swinging a 50 kg gate or indexing arm with margin to spare.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA Is Used
Parcel sorter diverter
A diverter gate on a parcel sorter: the pivot cover pins to the gate arm and 1558 N swings a loaded chute 110 mm across the belt.
Carousel indexing lever
Indexing lever on an assembly carousel, cushioned at both ends so the 110 mm swing stops without jolt on the pivot pin.
Bin-tipper latch
Small bin-tipper or hopper latch in a damp washdown corner of a food plant, where the stainless barrel outlasts painted steel bodies.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA the Right Cylinder?
A 50 mm bore twin of the same stroke yields 981 N at 0.5 MPa, so step up to this 63 mm model when linkage friction or tool weight eats your force budget. Over 110 mm the 16 mm rod can be bent by side thrust - keep the load on the rod axis or fit a Y knuckle. The CA pivot back cover pins straight to a linkage, while FA flange and LB foot brackets suit a fixed station if that is simpler. Remember the piston moves freely when air pressure drops, so add a check valve where a lifted arm must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA FAQ
Figures to size by: 1558 N push and 1457 N pull at 0.5 MPa; 2181 N push and 2040 N pull at 0.7 MPa; 317.7 kgf theoretical maximum. It is double acting with variable cushioning at both ends, takes 1/4" ports, uses an M14x1.5 rod thread, and runs 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s.
The CA back cover on the MAC63X110SCA has an integral pivot eye, so it pins straight to a linkage or lever arm without a fabricated bracket; if a fixed mount suits the machine better, FA flange and LB foot versions share the same barrel and 1/4" ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.