Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 130mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke130 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA
Swinging links and lever arms bolt straight onto the CA pivot back cover of the MAC63X130SCA, no fabricated bracket needed. Inside is the familiar MAC recipe: a riveted stainless round barrel, a 16 mm hard-chrome plated rod, and double-acting air with a variable cushion at both ends to tame the 130 mm stroke at up to 800 mm/s.
This is the strongest bore in the series - 1557.9 N push, 1457.4 N pull at 0.5 MPa, rising to 2181.0 N at 0.7 MPa. For lift work, that equates to hoisting about 79 kg vertically once a 2:1 safety margin is applied, so match it to parts under roughly that weight. The standard-fit piston magnet pairs with CMSG or DMSG switches, and the body runs on 0.15-1.0 MPa (22-145 psi) plant air filtered to 40 um.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA Is Used
Weld fixture swing clamp
Rotates a heavy clamp arm 90 degrees over a robot welding jig; the CA pivot carries the linkage directly and 1557.9 N at 0.5 MPa closes the clamp against springback.
Roller lift section
Raises a roller deck level with an assembly line floor; about 79 kg of vertical lift with a 2:1 margin handles loaded pallet parts while the cushions settle the deck gently.
Mix drum tilt cradle
Tilts a 20 L mixing drum for pour-out in a pilot plant; the pivot mount swings the cradle smoothly and the stainless barrel copes with frequent washdown between batches.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA the Right Cylinder?
If 1557.9 N of push at 0.5 MPa oversizes the job, the 50 mm bore still offers 981.3 N; if it undersizes, no MAC bore goes higher - 63 mm is the family's top. The CA pivot suits four-bar linkages and rotating clamps, while FA flange, LB foot and SDB brackets cover fixed mounting, with I and Y knuckles for the rod end. Keep in mind the piston coasts free when air is lost or the valve centres, so a rod lock or pilot check valve is the fix for parked loads. On a 130 mm stroke, guide the load externally to keep side load off the rod bushing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA FAQ
Push is 1557.9 N and pull 1457.4 N at 0.5 MPa; at 0.7 MPa push is 2181.0 N and pull 2040.3 N; theoretical peak 317.7 kgf at 1.0 MPa. Air supply: 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), fluid filtered to 40 um, ports 1/4".
The CA cover carries a pivot pin, so linkage arms, swing clamps and tilting cradles connect without adapter plates. Fixed installs are still covered - add FA flange, LB foot or SDB pivot brackets to the same barrel, or order the U or CM back-cover variant instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X130SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.