Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 600mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke600 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM
The CM round-end back cover gives the MAC63X600SCM a clean boss for eye or centre-pivot fixings while the 63 mm bore drives 1558 N at 0.5 MPa (22-145 psi supply). It is double acting, cushioned variably at both ends, and runs 30-800 mm/s - so a 600 mm heavy slide can arrive softly instead of banging the covers.
Its rolled stainless barrel and 20 um hard-chrome rod take coolant splash, humidity and the odd hose-down in stride, an edge painted mini cylinders give up quickly. For sizing, expect about 935 N of push that does real work at 0.5 MPa, roughly a 79 kg vertical lift at half the theoretical margin. The magnet is part of the standard build, letting CMSG / DMSG / EMSG switches clip onto the barrel with no special piston.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM Is Used
Mixer hatch lift
Pivot-raising a 75 kg hatch above a mixing vessel on an eye pin through the CM round-end boss. Half the rated force still lifts about 79 kg, so the hatch moves with margin to spare.
Coolant drip tray
Extending a drip tray under a CNC machining centre during cutting and retracting it for chip clearing. The stainless barrel tolerates coolant splash that swells painted minis.
Bakery oven door
Swinging a heavy oven-door linkage through its arc on a rack oven line; 1457 N of pull at 0.5 MPa closes the door against gasket drag while the cushion damps the latch.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM the Right Cylinder?
Compare the 50 mm bore at 981 N (0.5 MPa) for lighter lids; keep this 63 mm bore when a 600 mm slide carries real mass. The stroke runs past the 500 mm standard limit, so it is a made-to-order build. The round-end cover accepts a pivot pin without adapters, while FA flange, LB foot or SDB options anchor the barrel; a 1/4" port feeds each side and the rod thread is M14x1.5. With air off the rod simply drifts under load - add a check valve or rod lock where position matters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM FAQ
Rated 1557.9 N push / 1457.4 N pull at 0.5 MPa, climbing to 2181.0 N / 2040.3 N at 0.7 MPa, with a 317.7 kgf theoretical peak at 1.0 MPa. The variable air cushion at both ends lets you run these forces at up to 800 mm/s without hammering the covers.
No. As a double-acting cylinder with no lock, the rod moves wherever the load and gravity take it once supply pressure is gone; the air cushion only slows motion near the ends. For hanging loads fit a rod-lock unit or pilot-operated check valves so the 600 mm stroke stays where you left it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X600SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.