Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM
Need the strongest bore AirTAC makes in the MAC mini family with a pinned rear joint? The MAC63X60SCM pairs the 63 mm bore - 1558 N push and 1457 N pull at 0.5 MPa, up to 2181 N at 0.7 MPa - with a CM round-end back cover whose rounded boss drops straight into clevis-style links.
Both stroke ends carry a variable air cushion, so a slide arriving fast lands soft instead of hammering the aluminium covers. Budget roughly 935 N, about 60% of the 0.5 MPa push, for actual work; read vertically, that force class lifts near 79 kg with a 2:1 margin. The magnet ships fitted as standard, so CMSG / DMSG / EMSG switches snap on without ordering a special piston, and the stainless barrel with hard-chromed 16 mm rod tolerates washdown where painted minis blister.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM Is Used
Weld fixture clamping
Round-end pin mounts the cylinder to a pivot block that clamps car-door brackets, with 2181 N available at 0.7 MPa for repeatable clamp force.
Rotational mold assist
Assists closing a small rotational mold on a casting carousel, the dual cushions absorbing the last degrees of travel so the parting line stays true.
Bar feeder pusher
Drives the finger that advances steel bar into a CNC lathe collet, the hard-chrome rod standing up to constant cutting-fluid mist.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM the Right Cylinder?
Against the MAC50 bore (981 N push at 0.5 MPa) this 63 mm version adds around 60% more force in the same round format, and nothing larger exists in the range - heavier jobs leave the mini class entirely. Mount with an SDB pivot bracket or LB foot, add an I or Y rod knuckle for offset linkages. When air is removed the piston floats; a pilot check valve holds a mid-stroke load, the cushion does not act as a brake.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM FAQ
Push at 0.5 MPa is 1558 N, pull 1457 N; at 0.7 MPa expect 2181 N and 2040 N respectively, with a theoretical maximum of 317.7 kgf at 1.0 MPa. Supply pressure spans 0.15-1.0 MPa (22-145 psi) of 40 um filtered air, speed 30-800 mm/s, with adjustable air cushioning at both ends.
The barrel is high-precision stainless steel rolled onto aluminium covers, and the 16 mm rod is carbon steel with a 20 um hard-chrome plate. That combination shrugs off mild corrosion and hose-down in food, washdown or outdoor positions where painted or plain aluminium mini cylinders corrode and score.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.