Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø63mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ63 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM14×1.5
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU
Flat-ended and plate-friendly, the MAC63X60SU bolts flush against machine faces: a 63 mm double-acting mini cylinder with a variable air cushion at each end and a U back cover presenting a square mounting face. It pushes 1558 N and pulls 1457 N at 0.5 MPa, reaching 2181 N push at 0.7 MPa.
The stainless barrel plus hard-chromed 16 mm rod take hose-down in damp plants, a real edge over painted minis in food and outdoor cells. Plan on about 935 N of the 0.5 MPa push for genuine work, or near 79 kg of vertical lift with a 2:1 margin. The magnet is built in as standard equipment, so CMSG / DMSG / EMSG switches mount on the barrel with no special-order piston, and speed spans 30-800 mm/s on 0.15-1.0 MPa (22-145 psi) air.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU Is Used
Compression test platen
Raises the 30 kg platen of a bench compression station; the 79 kg vertical-lift margin keeps the ram from stalling with fixtures fitted.
Rip-saw hold-down
Presses a sprung hold-down shoe onto timber on a rip line, the 1457 N pull stroke retracting the shoe clear for board changeover.
Big-bag discharge gate
Opens the slide gate at the base of a powder big-bag frame, where the stainless body resists the damp, dusty atmosphere around the discharge spout.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU the Right Cylinder?
Step up from a MAC40 bore (628 N push at 0.5 MPa) when the load more than doubles that force; the 63 mm is the ceiling of the MAC line, so above 1558 N at 0.5 MPa you are outside the family. The flat U end plus an FA flange forms a rigid fixed mount, while an SDB bracket covers pivoting needs. If the stroke must hold on air loss, fit a rod lock or pilot check valve - a plain MAC drifts when supply drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU FAQ
Push at 0.5 MPa: 1558 N. Pull at 0.5 MPa: 1457 N. Push at 0.7 MPa: 2181 N. Theoretical maximum at 1.0 MPa: 317.7 kgf. Operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa, speed 30-800 mm/s, air filtered to 40 um, variable cushion at both ends.
Yes. Every MAC cylinder carries a piston magnet as standard, so CMSG, DMSG and EMSG reed or electronic switches clamp onto the stainless barrel at any stroke point to signal end positions or mid-stroke shots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC63X60SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.