This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL20X10CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL20X10CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA
The AirTAC Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 10mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL20X10CA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X10CA
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA
The AirTAC MAL20X10CA is a discontinued compact double-acting aluminum mini round cylinder with a 20mm bore and 10mm stroke. It delivers 157N push and 132N pull at 0.5 MPa. AirTAC replaced the MAL series with the MBL line, making the MBL20X10CA the exact drop-in replacement sharing the same force, G1/8 port, and CA pivot mounting.
This legacy SKU features a CA pivot back cover that swings on a pin to absorb arcing loads, paired with a fixed rubber bumper for end-of-stroke damping. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement uses a riveted rolling-packed body. Because this specific configuration lacks a -S magnet, it cannot accept a position sensor.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X10CA |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X10CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X10CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA Is Used
PCB Router Pivot Arm
Drives a short 10mm routing stroke on a pivoting depaneling arm, where the CA clevis accommodates the slight arc and 157N push is sufficient for scoring.
IC Test Socket Ejector
Provides a compact 10mm kick to release tested microchips from a socket, relying on the 132N pull at 0.5 MPa to retract the tiny probe pin quickly.
Carton Flap Deflector
Pivots a small guide flap on a packaging line to redirect small cartons, using the lightweight 20mm body to fit within tight conveyor side-rails.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA with MBL20X10CA
To replace the MAL20X10CA, order the MBL20X10CA, ensuring you keep the PT thread, CA pivot cover, and 8mm rod with M8x1.25 thread. If you need position sensing, you must step up to an MBL20X10SCA model, noting that the modern MBL uses CMSG/DMSG/EMSG switches rather than the old CS1-M/DS1-M sensors. The fixed rubber bumper is not a lock; air loss causes drift, so use an external rod lock for holding.
For sizing flexibility, stepping down is not an option below 20mm. Stepping up to the 25mm bore yields 245N push at 0.5 MPa if your application needs more force. If your cycle requires adjustable end-cushioning rather than a fixed bumper, specify the current-line MBLC equivalent.
Upgrade checklist
- ✓ Order the MBL20X10CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X10CA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA FAQ
Yes, the MAL20X10CA is discontinued. The exact drop-in replacement is the MBL20X10CA, which matches the 20mm bore, 10mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted body instead of threaded covers.
At 0.5 MPa it provides 157N push and 132N pull, 220N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. Because this SKU lacks the -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL20X10CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X10CA → MBL20X10CA)
Tell us the quantity and destination — we quote the drop-in MBL20X10CA replacement with price, stock and lead time, usually within 7-8 hours.