This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL20X115SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL20X115SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA
The AirTAC Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 115mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL20X115SCA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke115 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X115SCA
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA
The AirTAC MAL20X115SCA is a discontinued compact double-acting aluminum mini round cylinder. Delivering 157 N push and 132 N pull at 0.5 MPa, it features a 20 mm bore, 115 mm stroke, and a G1/8 port. The exact drop-in replacement is the MBL20X115SCA, which matches the bore, stroke, force, port, and CA pivot mounting.
This legacy unit includes a built-in magnet (-S) for position detection with older CS1-M or DS1-M switches. When upgrading to the MBL20X115SCA, the riveted rolling-packed body replaces the original threaded front and back covers, and you must update to current CMSG, DMSG, or EMSG sensors. The internal heterogeneous two-way seal retains grease, while the self-lubricating front-cover bearing guide supports the 8 mm hard-chrome plated carbon steel rod.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X115SCA |
| Bore size | Ø20 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X115SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X115SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×115 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA Is Used
Textile Loom Guide
Drives a lightweight yarn guide arm on a textile loom, utilizing the 157 N push force and CA clevis to accommodate the pivoting arc motion.
PCB Shuttle Pusher
Indexes bare printed circuit boards into an inspection station, relying on the 115 mm stroke and -S magnet to confirm retraction.
Pouch Sealing Flap
Actuates a small diverting flap on a packaging conveyor, where the compact 20 mm bore fits tightly between guide rails.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA with MBL20X115SCA
To replace the MAL20X115SCA, order the MBL20X115SCA. Confirm your 115 mm stroke, 20 mm bore, PT thread, and CA pivot back cover. Because this SKU includes the -S magnet, plan to swap your legacy CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors on the new MBL body. If you need adjustable end-cushioning, step up to the MBLC variant, as the MAL only has a fixed rubber bumper.
For sizing, the 20 mm bore provides 157 N push at 0.5 MPa. If you need less force, the next size down is not available in this mini series, but if you need more power, the 25 mm bore yields 245 N at 0.5 MPa. At 115 mm stroke, side-load tolerance is low due to the 8 mm rod; rely on the CA clevis to absorb arcing loads. A plain MAL does not hold position when air is lost, so use an external rod lock for vertical loads.
Upgrade checklist
- ✓ Order the MBL20X115SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X115SCA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA FAQ
Yes, the MAL20X115SCA is discontinued. The exact drop-in replacement is the MBL20X115SCA, offering the same 20 mm bore, 115 mm stroke, CA pivot cover, and G1/8 port. You must upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
At 0.5 MPa, push force is 157 N and pull is 132 N. At 0.7 MPa, push is 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. Operating speed ranges from 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL20X115SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X115SCA → MBL20X115SCA)
Tell us the quantity and destination — we quote the drop-in MBL20X115SCA replacement with price, stock and lead time, usually within 7-8 hours.