This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL20X200-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL20X200-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM
The AirTAC Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL20X200-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X200-S-CM
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM
The AirTAC MAL20X200-S-CM is a discontinued compact double-acting aluminum mini round cylinder. Delivering 157 N of push force at 0.5 MPa, it features a 20 mm bore, a 200 mm stroke, and a built-in magnet. Its CM round-end back cover is designed for arcing pivot movements. The exact drop-in replacement is the MBL20X200-S-CM, which matches the original bore, stroke, output force, G1/8 port, and mounting hardware.
This legacy MAL unit relies on threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body for enhanced structural integrity. Because this SKU includes an -S magnet, it originally paired with CS1-M or DS1-M reed switches; upgrading to the MBL means transitioning to the current CMSG, DMSG, or EMSG sensor family. Internally, a heterogeneous two-way seal retains grease, and the 8 mm carbon-steel rod features 20 um hard-chrome plating.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X200-S-CM |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X200-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X200-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM Is Used
PCB Depaneling Saw
Pushes a 157 N blade feed at 0.5 MPa on a 200 mm stroke, using the CM round-end to accommodate slight angular blade entry.
IC Test Handler Tray
Indexes empty test trays over 200 mm with a lightweight aluminum body, relying on the -S magnet to trigger the CS1-M sensor at full extension.
Small Part Divert Gate
Actuates a lightweight sorting flap in tight machinery spaces, where the 8 mm hard-chrome rod withstands repetitive 132 N retraction loads.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM with MBL20X200-S-CM
To replace the MAL20X200-S-CM, order the MBL20X200-S-CM. Verify your 20 mm bore, 200 mm stroke, G1/8 port, and CM round-end back cover. The default port thread is PT. If your application requires an adjustable air cushion rather than the fixed rubber bumper found on this MAL, you must step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 32 mm bore yields 402 N push at 0.5 MPa, while no smaller standard bore exists below 20 mm. At 200 mm of stroke, the 8 mm rod has low side-load tolerance; use an external guide or ensure the CM pivot absorbs any angular rod stress. Note that this cylinder drifts when air pressure is lost, so add an external rod lock for position holding. The -S magnet enables end-of-stroke detection.
Upgrade checklist
- ✓ Order the MBL20X200-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X200-S-CM instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM FAQ
Yes, the MAL20X200-S-CM is discontinued. The exact drop-in replacement is the MBL20X200-S-CM, offering the same 20 mm bore, 200 mm stroke, force, G1/8 port, and CM round-end mounting. You will need to upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The MAL20X200-S-CM features a G1/8 port and an 8 mm rod. At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push force is 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL20X200-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X200-S-CM → MBL20X200-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL20X200-S-CM replacement with price, stock and lead time, usually within 7-8 hours.