This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL20X65CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA
The AirTAC MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 65mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL20X65CA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke65 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X65CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA
The AirTAC MAL20X65CA is a discontinued compact double-acting aluminum mini round cylinder. Delivering 157 N of push force at 0.5 MPa, it features a 20 mm bore, 65 mm stroke, and a CA pivot back cover. AirTAC ended this series, replacing it with the MBL20X65CA—a direct upgrade retaining the exact bore, stroke, output force, G1/8 port, and CA mounting interface.
This SKU lacks the -S magnet, meaning it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body. Internally, a heterogeneous two-way seal retains grease, and the 8 mm carbon-steel rod features 20 um hard-chrome plating guided by a self-lubricating front-cover bearing.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X65CA |
| Bore size | Ø20 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X65CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X65CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×65 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA Is Used
PCB Depaneling Router
Actuates a cutting blade in tight electronics manufacturing, using 157 N of push force at 0.5 MPa to sever individual circuit boards from a panel.
IC Test Handler Pusher
Cycles 65 mm to feed semiconductor packages into a test socket, relying on the compact 20 mm aluminum body to fit dense tester arrays.
Small Part Diverter
Swings on its CA pivot to deflect lightweight plastic caps on a packaging line, absorbing arcing motion without bending the 8 mm rod.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA with MBL20X65CA
To replace the MAL20X65CA, order the MBL20X65CA. Verify your 65 mm stroke, G1/8 port, PT tapered threads, and CA pivot clevis. If your machine requires end-of-stroke cushioning, note that the MAL only has a fixed rubber bumper; you must step up to the MBLC20X65CA on the current line for an adjustable air cushion. A plain cylinder drifts when air is lost, so add an external rod lock for vertical loads.
For sizing flexibility, stepping down to the next smaller bore is not an option as 20 mm is the smallest available. Stepping up to the 25 mm bore yields 245 N push force at 0.5 MPa. Because the 8 mm rod offers low side-load tolerance, use the CA pivot to absorb arcing loads rather than rigidly mounting the cylinder.
Upgrade checklist
- ✓ Order the MBL20X65CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X65CA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA FAQ
Yes, the MAL20X65CA is discontinued. The direct replacement is the MBL20X65CA, which matches the 20 mm bore, 65 mm stroke, CA pivot, and G1/8 port. The MBL uses a riveted body instead of threaded covers.
At 0.5 MPa it provides 157 N push and 132 N pull force; at 0.7 MPa it pushes 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. This specific SKU lacks a magnet, so it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBL20X65CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X65CA → MBL20X65CA)
Tell us the quantity and destination — we quote the direct MBL20X65CA replacement with price, stock and lead time, usually within 7-8 hours.