This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL20X90CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA
The AirTAC MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 90mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL20X90CA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X90CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA
The AirTAC MAL20X90CA is a discontinued compact double-acting aluminum mini round cylinder with a 20mm bore and 90mm stroke. It delivers 157N of push force and 132N of pull force at 0.5MPa. Because this legacy series has ended production, AirTAC provides the MBL20X90CA as the direct replacement. It matches the original bore, stroke, output force, G1/8 port, and CA pivot mounting for a seamless transition.
This SKU features a CA pivot back cover, allowing the cylinder body to swing on a pin to absorb arcing loads and misalignment. Unlike the threaded front and back covers found on this legacy MAL body, the modern MBL replacement uses a riveted rolling-packed construction. Since this specific configuration lacks an -S magnet, it cannot accept a position sensor; if detection is needed, an MBL20X90CAS must be ordered alongside current CMSG or DMSG switches.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X90CA |
| Bore size | Ø20 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X90CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X90CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×90 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA Is Used
Textile Loom Guide
Actuates a 157N thread guide arm on a compact weaving loom, utilizing the CA pivot to accommodate the slight arc of the moving carriage.
PCB Depaneling Gate
Cycles a small routing gate on an electronics depaneling machine where the 132N pull force securely retracts the barrier between cuts.
Carton Flap Folder
Pushes corrugated minor flaps on a compact packaging station, with the 90mm stroke providing just enough travel to clear the product.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA with MBL20X90CA
To replace the MAL20X90CA, order the MBL20X90CA. Verify your 90mm stroke, G1/8 port, PT thread, and CA pivot back cover. If your application requires less force, step down to the 12mm bore class; if you need more thrust, step up to the 25mm bore, which provides 245N push force at 0.5MPa. Note that a plain MBL cylinder does not hold a load when air pressure is lost, as the fixed rubber bumper only softens the end of stroke rather than locking the rod. If adjustable air cushioning is required for the 90mm travel, look to the current MBLC variant, as the MAL only offered a fixed rubber bumper.
Upgrade checklist
- ✓ Order the MBL20X90CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X90CA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA FAQ
Yes, the MAL20X90CA is discontinued. The direct replacement is the MBL20X90CA, which matches the 20mm bore, 90mm stroke, CA pivot back cover, G1/8 port, and force output. You can install the MBL replacement using the same mounting hardware.
At 0.5MPa it provides 157N push and 132N pull force, 220N push at 0.7MPa, and a maximum theoretical force of 32kgf at 1.0MPa. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBL20X90CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X90CA → MBL20X90CA)
Tell us the quantity and destination — we quote the direct MBL20X90CA replacement with price, stock and lead time, usually within 7-8 hours.