This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X10SULB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X10SULB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 10mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X10SULB, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X10SULB
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB
The AirTAC MAL25X10SULB is a discontinued compact double-acting aluminum mini round cylinder with a 25mm bore and 10mm stroke. It delivers 245N push and 206N pull force at 0.5MPa. The exact drop-in replacement is the MBL25X10SULB, matching the bore, stroke, force, G1/8 port, and LB foot mount. The MAL uses threaded front and back covers, while the MBL features a riveted rolling-packed body for equivalent ratings.
This SKU includes a U flat-end back cover for rigid rear mounting and an LB foot bracket. The -S magnet enables position sensing with older CS1-M or DS1-M switches; upgrading to the MBL requires switching to CMSG, DMSG, or EMSG sensors. The 10mm stroke relies entirely on a fixed rubber bumper to soften end-of-travel impacts, as the legacy line lacks adjustable air cushions. A heterogeneous two-way seal retains grease, and the 10mm carbon-steel rod has 20um hard-chrome plating to resist wear.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X10SULB |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X10SULB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X10SULB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB Is Used
PCB Depaneling Router
Provides 245N of push at 0.5MPa to separate routed circuit boards on a 10mm stroke within tight electronics assembly cells.
Carton Flap Folder
Cycles rapidly at 10mm to tuck minor flaps on small packaging lines, utilizing the LB foot mount for rigid base attachment.
Connector Latching Press
Snaps modular DIN rail terminals together, using the U flat-end cover to absorb rearward reaction forces without arcing.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB with MBL25X10SULB
To replace the MAL25X10SULB, order the MBL25X10SULB. Confirm your 25mm bore, 10mm stroke, G1/8 PT port, U flat-end cover, and LB foot mount. Because the -S magnet is present, plan to replace your old CS1-M or DS1-M switches with CMSG, DMSG, or EMSG sensors on the new riveted body. If you need an adjustable air cushion, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 20mm bore yields 157N push at 0.5MPa, while stepping up to the 32mm bore provides 402N push. This cylinder cannot hold a load when air is lost—the rod drifts. The fixed rubber bumper only softens the stroke end; it is not a lock. For secure load holding, install an external rod lock or a pilot-operated check valve.
Upgrade checklist
- ✓ Order the MBL25X10SULB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X10SULB instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB FAQ
Yes, the MAL25X10SULB is discontinued. The exact drop-in replacement is the MBL25X10SULB, offering the same 25mm bore, 10mm stroke, 245N push force, G1/8 port, and LB foot mount.
At 0.5MPa, it pushes 245N and pulls 206N; at 0.7MPa it pushes 343N, with a theoretical max of 50kgf at 1.0MPa. The -S magnet works with older CS1-M or DS1-M switches; the MBL replacement requires CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X10SULB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X10SULB → MBL25X10SULB)
Tell us the quantity and destination — we quote the drop-in MBL25X10SULB replacement with price, stock and lead time, usually within 7-8 hours.