This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X130SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X130SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 130mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X130SCA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X130SCA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA
The AirTAC MAL25X130SCA is a discontinued double-acting aluminum mini round cylinder with a 25mm bore and 130mm stroke. It provides 245N of push force and 206N of pull force at 0.5MPa. The exact drop-in replacement is the MBL25X130SCA, which matches the original bore, stroke, output force, G1/8 port, and CA mounting. The legacy MAL body uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally durable performance in compact spaces.
This specific SKU includes a built-in magnet (-S) and a CA pivot back cover. The magnet enables position detection, but note that the older MAL works with CS1-M or DS1-M reed switches, while the MBL replacement requires the current CMSG, DMSG, or EMSG sensor families. The CA clevis back cover allows the cylinder to swing on a pin, making it ideal for absorbing arcing loads. Internally, a heterogeneous two-way seal retains grease, and the carbon-steel rod features 20um hard-chrome plating to resist wear.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X130SCA |
| Bore size | Ø25 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X130SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X130SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA Is Used
Textile Loom Let-Off
The 245N push force at 0.5MPa drives tensioning arms on a weaving machine, while the CA pivot absorbs the fabric's rhythmic arcing motion.
Package Divert Arm
Using the 130mm stroke to push lightweight parcels between sorting lanes, the G1/8 port ensures rapid cycling within tight transfer spaces.
PCB Test Fixture
The -S magnet confirms rod extension for automated electrical testing, while the compact 25mm body fits densely packed inspection cells.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA with MBL25X130SCA
To replace the MAL25X130SCA, order the MBL25X130SCA. Confirm your 25mm bore, 130mm stroke, G1/8 port, PT thread, and CA pivot back cover. Because this SKU has the -S magnet, you must upgrade your sensors from the old CS1-M/DS1-M to the CMSG/DMSG/EMSG family. If you need to adjust force, stepping down to a 20mm bore yields 157N push at 0.5MPa, while stepping up to a 32mm bore provides 402N push at 0.5MPa.
The 130mm stroke exceeds 300mm, so side-load tolerance is a concern with the 10mm rod. The CA pivot bracket helps accommodate arcing loads, but an external guide is recommended for rigid trajectories. The fixed rubber bumper softens end-of-stroke impacts but does not lock the rod; if air is lost, the load drifts. For adjustable air cushioning, switch to the MBLC variant on the current line.
Upgrade checklist
- ✓ Order the MBL25X130SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X130SCA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA FAQ
Yes, the MAL25X130SCA is discontinued. The exact drop-in replacement is the MBL25X130SCA, offering the same 25mm bore, 130mm stroke, CA pivot, and force. You only need to update your sensors from CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
At 0.5MPa it pushes with 245N and pulls with 206N. At 0.7MPa the push force is 343N, and the maximum theoretical force is 50kgf at 1.0MPa. The operating speed ranges from 30-800mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X130SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SCA → MBL25X130SCA)
Tell us the quantity and destination — we quote the drop-in MBL25X130SCA replacement with price, stock and lead time, usually within 7-8 hours.