This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X130SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X130SU in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 130mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X130SU, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X130SU
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU
The AirTAC MAL25X130SU is a discontinued compact double-acting aluminum mini round cylinder with a 25mm bore and 130mm stroke. It delivers 245N of push force and 206N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL25X130SU, which matches the original bore, stroke, output force, G1/8 port, and U flat-end back cover.
This legacy SKU features a built-in magnet (-S) for position detection and a U flat-end back cover for rigid rear mounting. The original MAL body used threaded front and back covers, whereas the current MBL replacement uses a riveted rolling-packed body. Additionally, the -S magnet on this discontinued model functions with the older CS1-M and DS1-M switches, but upgrading to the MBL requires switching to the current CMSG, DMSG, or EMSG sensor family.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X130SU |
| Bore size | Ø25 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X130SU carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X130SU produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU Is Used
PCB Depaneling Router
Drives a cutting blade at 130mm stroke to singulate assembled circuit boards, utilizing the 245N push force to cleanly slice through rigid substrates.
Carton Flap Folder
Actuates a mechanical arm to fold minor flaps on small packaging lines, where the compact 25mm aluminum body fits within tight conveyor clearances.
Connector Insertion Press
Pushes ribbon cable headers into PCB receptacles, relying on the U flat-end cover for rigid alignment during delicate 130mm travel insertion cycles.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU with MBL25X130SU
To replace the MAL25X130SU, order the MBL25X130SU. Verify your setup accommodates the G1/8 port and the M10x1.25 rod-end thread. Because this SKU includes the -S magnet, you must upgrade your position sensors from the legacy CS1-M or DS1-M to the modern CMSG, DMSG, or EMSG switches used on the MBL. The U flat-end back cover provides a rigid rear mount, so ensure your fixture supports this non-pivoting configuration.
For sizing flexibility, you can step down to the 20mm bore (offering 157N push at 0.5 MPa) if your load is lighter, or step up to the 32mm bore (providing 402N push at 0.5 MPa) for higher force. This 130mm stroke exceeds the 300mm threshold, meaning the 10mm rod has low side-load tolerance; use an external guide rail or a pivot mount to prevent rod bending. Note that the fixed rubber bumper softens end-of-stroke impact but does not hold the load if air pressure drops. If your application requires adjustable end-cushioning, specify the MBLC variant instead of the standard MBL.
Upgrade checklist
- ✓ Order the MBL25X130SU (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X130SU instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU FAQ
Yes, the MAL25X130SU is discontinued. The exact drop-in replacement is the MBL25X130SU, which offers the same 25mm bore, 130mm stroke, G1/8 port, and U flat-end mounting. You must upgrade your sensors from the old CS1-M or DS1-M to the CMSG, DMSG, or EMSG family.
At 0.5 MPa, the push force is 245N and the pull force is 206N. At 0.7 MPa, the push force is 343N. The maximum theoretical force is 50 kgf at 1.0 MPa. The cylinder operates at speeds of 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X130SU replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X130SU → MBL25X130SU)
Tell us the quantity and destination — we quote the drop-in MBL25X130SU replacement with price, stock and lead time, usually within 7-8 hours.