This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X135SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X135SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 135mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X135SCA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke135 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X135SCA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA
The AirTAC MAL25X135SCA is a discontinued double-acting aluminum mini round cylinder. It delivers 245 N of push force and 206 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL25X135SCA, which matches the 25 mm bore, 135 mm stroke, G1/8 port, and CA pivot back cover.
This legacy unit features a CA pivot clevis that swings on a pin to absorb arcing rod loads. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Because this SKU includes the -S magnet, it used the older CS1-M or DS1-M switches; upgrading to the MBL requires the current CMSG, DMSG, or EMSG sensor family.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X135SCA |
| Bore size | Ø25 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X135SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X135SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×135 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA Is Used
Textile Loom Guide
Shifts a 135 mm yarn guide arm with 245 N push at 0.5 MPa, using the CA pivot clevis to absorb the lateral rod arc during high-speed weaving.
Bottle Sorting Diverter
Provides 206 N pull force to retract a routing flap between conveyor lanes, fitting into tight machinery spaces where a larger cylinder cannot mount.
Carton Flap Folder
Cycles a 135 mm stroke to tuck minor carton flaps, relying on the fixed rubber bumper to soften the rapid end-of-stroke impact during packaging runs.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA with MBL25X135SCA
To replace the MAL25X135SCA, order the MBL25X135SCA. Verify your setup needs a PT threaded port and the CA pivot back cover for arcing movements. If you need to step down, the 20 mm bore provides 157 N of push at 0.5 MPa. Stepping up to the 32 mm bore yields 402 N of push. At 135 mm of stroke, the 10 mm rod has low side-load tolerance, so rely on the CA pivot to prevent rod bending. The fixed rubber bumper softens end-of-stroke impacts but does not lock the load; use an external rod lock for position holding. If you need an adjustable air cushion, specify the MBLC variant on the current line instead.
Upgrade checklist
- ✓ Order the MBL25X135SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X135SCA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA FAQ
Yes, the MAL25X135SCA is discontinued. The exact drop-in replacement is the MBL25X135SCA, which matches the 25 mm bore, 135 mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted body instead of threaded covers.
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X135SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X135SCA → MBL25X135SCA)
Tell us the quantity and destination — we quote the drop-in MBL25X135SCA replacement with price, stock and lead time, usually within 7-8 hours.