This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X180CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X180CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 180mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X180CM, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke180 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X180CM
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM
The AirTAC MAL25X180CM is a discontinued double-acting aluminum mini round cylinder with a 25mm bore and 180mm stroke. It delivers 245N of push force and 206N of pull force at 0.5MPa, making it suitable for compact mid-range actuation. The exact drop-in replacement is the MBL25X180CM, which matches the original bore, stroke, output force, G1/8 port, and CM round-end mounting.
This legacy SKU features a CM round-end back cover for arcing or pivot-style rod loads. Unlike the newer MBL which uses a riveted rolling-packed body, the MAL uses threaded front and back covers. Because this specific model lacks an -S magnet, it cannot accept a position sensor. The rod is 10mm carbon steel with 20um hard chrome plating, guided by a self-lubricating front-cover bearing.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X180CM |
| Bore size | Ø25 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X180CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X180CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×180 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM Is Used
Cardboard Box Flap Folding
Pushes corrugated flaps closed on a packaging conveyor using 245N of thrust at 0.5MPa, fitting within tight side-frame clearances.
Lathe Tailstock Ejection
Provides 206N of pull force at 0.5MPa to retract a small tailstock ejector pin, utilizing the CM round-end cover to accommodate slight arcing geometry.
Parts Diverter Gate
Actuates a lightweight pneumatic diverter arm on a sortation system, moving small injection-molded components between chutes over a 180mm travel.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM with MBL25X180CM
To replace the MAL25X180CM, order the MBL25X180CM. Verify your 25mm bore, 180mm stroke, G1/8 PT port, and CM round-end back cover. If you need to adjust force, stepping down to the 20mm bore yields 157N push at 0.5MPa, while stepping up to the 32mm bore provides 402N. Since this SKU has no -S magnet, it cannot support a sensor; if you need position detection, order an MBL25X180CMS and note that you must upgrade from the old CS1-M/DS1-M switches to the current CMSG/DMSG/EMSG family. The MAL uses a fixed rubber bumper, so if you need end-of-stroke deceleration, specify the MBLC variant for its adjustable air cushion. A plain bumper does not hold a load when air is lost; use an external rod lock for fail-safe positioning. At 180mm stroke, the 10mm rod is susceptible to bending under side loads—use a pivot mount or external guide to prevent rod damage.
Upgrade checklist
- ✓ Order the MBL25X180CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X180CM instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM FAQ
Yes, the AirTAC MAL25X180CM is discontinued. The exact drop-in replacement is the MBL25X180CM, which matches the 25mm bore, 180mm stroke, 50kgf max force, G1/8 port, and CM mounting. You only need to order the MBL25X180CM as a direct fit.
At 0.5MPa it provides 245N push and 206N pull; at 0.7MPa it provides 343N push, with a maximum theoretical force of 50kgf at 1.0MPa. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor like the CS1-M or DS1-M.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X180CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X180CM → MBL25X180CM)
Tell us the quantity and destination — we quote the drop-in MBL25X180CM replacement with price, stock and lead time, usually within 7-8 hours.