This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X210SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X210SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 210mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X210SCA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X210SCA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA
The AirTAC MAL25X210SCA is a discontinued compact double-acting aluminum mini round cylinder. Delivering 245 N of push force at 0.5 MPa, it features a 25 mm bore, 210 mm stroke, a built-in magnet, and a CA pivot back cover. The exact drop-in replacement is the MBL25X210SCA, matching the bore, stroke, force, G1/8 port, and mounting.
This legacy unit has threaded front and back covers, whereas the modern MBL uses a riveted rolling-packed body. Its -S magnet pairs with older CS1-M or DS1-M switches, while the MBL successor requires CMSG, DMSG, or EMSG sensors. The 10 mm carbon-steel rod has 20 um hard chrome plating, and a heterogeneous two-way seal retains grease for friction reduction.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X210SCA |
| Bore size | Ø25 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X210SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X210SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×210 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA Is Used
Textile Loom Guide
Drives a 210 mm yarn guide arm on a textile loom, utilizing the 245 N push force and CA pivot to accommodate the mechanism's sweeping arc.
Pouch Sorting Diverter
Actuates a 25 mm bore diverting flap on a packaging conveyor, where the compact aluminum body fits tightly between roller sections.
Carton Flap Folder
Folds minor carton flaps in a case erecting machine, relying on the 206 N pull force at 0.5 MPa to retract the 10 mm rod cleanly.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA with MBL25X210SCA
To replace the MAL25X210SCA, order the MBL25X210SCA. Verify your CA pivot clevis pin and PT thread form. Because the -S magnet is present, prepare to swap your legacy CS1-M/DS1-M switches for CMSG/DMSG/EMSG sensors. If you need less force, step down to the 20 mm bore (157 N push at 0.5 MPa); if you need more, step up to the 32 mm bore (402 N push). At 210 mm stroke, the 10 mm rod has low side-load tolerance, so use the CA pivot to absorb arcing loads or add an external guide. The fixed rubber bumper softens stroke ends, but for adjustable cushioning, look at the MBLC variant. This cylinder will drift if air is lost, so add an external rod lock for position holding.
Upgrade checklist
- ✓ Order the MBL25X210SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X210SCA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA FAQ
Yes, the MAL25X210SCA is discontinued. The exact drop-in replacement is the MBL25X210SCA, offering the same 25 mm bore, 210 mm stroke, 50 kgf max force, G1/8 port, and CA pivot mounting.
At 0.5 MPa, it provides 245 N push and 206 N pull. At 0.7 MPa, push is 343 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The port size is G1/8.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X210SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X210SCA → MBL25X210SCA)
Tell us the quantity and destination — we quote the drop-in MBL25X210SCA replacement with price, stock and lead time, usually within 7-8 hours.