This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X230SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X230SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 230mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X230SCM, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X230SCM
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM
The AirTAC MAL25X230SCM is a discontinued double-acting aluminum mini round cylinder delivering 245 N of push force at 0.5 MPa. It features a 25 mm bore, a 230 mm stroke, and a G1/8 port. AirTAC replaced this legacy unit with the MBL25X230SCM, a true drop-in alternative retaining the exact same dimensions, output, and mounting interface.
This SKU includes a built-in magnet (-S) and a CM round-end back cover. The original MAL body uses threaded front and rear covers, whereas the newer MBL utilizes a riveted rolling-packed assembly. Furthermore, the -S magnet on this cylinder pairs with legacy CS1-M or DS1-M reed switches; upgrading to the MBL25X230SCM requires migrating to current CMSG, DMSG, or EMSG electronic sensors.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X230SCM |
| Bore size | Ø25 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X230SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X230SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×230 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM Is Used
PCB Test Handler
Cycles a 245 N probe head over a 230 mm travel distance to contact test points on large server motherboards.
Carton Flap Folder
Uses the CM round-end cover to pivot and fold corrugated box flaps smoothly along a packaging conveyor.
Lab Tube Racking
Raises and lowers a sample tray 230 mm inside an automated centrifuge loading carousel.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM with MBL25X230SCM
To replace the MAL25X230SCM, order the MBL25X230SCM. Confirm your 25 mm bore, 230 mm stroke, G1/8 port, and default PT tapered thread. Retain the CM round-end back cover and your existing mounting hardware. Because this SKU has the -S magnet, plan to swap your older CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors on the MBL.
If you need to adjust thrust, stepping down to the 20 mm bore yields 157 N of push at 0.5 MPa, while stepping up to the 32 mm bore provides 402 N. Since the 230 mm stroke exceeds 300 mm, the 10 mm piston rod has limited side-load tolerance; use an external guide rail to prevent rod bending. This cylinder uses a fixed rubber bumper, so specify an MBLC if you need adjustable air cushioning. Note that a plain cylinder drifts when air is lost, so add a pilot-operated check valve if you must hold a load mid-stroke.
Upgrade checklist
- ✓ Order the MBL25X230SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X230SCM instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM FAQ
Yes, the MAL25X230SCM is discontinued. The exact drop-in replacement is the MBL25X230SCM, which matches the 25 mm bore, 230 mm stroke, G1/8 port, and CM round-end cover. You must upgrade your CS1-M or DS1-M sensors to CMSG, DMSG, or EMSG switches for the new body.
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X230SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X230SCM → MBL25X230SCM)
Tell us the quantity and destination — we quote the drop-in MBL25X230SCM replacement with price, stock and lead time, usually within 7-8 hours.