This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X350-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X350-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 350mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X350-CA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X350-CA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA
The AirTAC MAL25X350-CA is a discontinued double-acting aluminum mini round cylinder. It delivers a 245 N push force at 0.5 MPa over a 350 mm stroke. AirTAC replaced this legacy unit with the MBL25X350-CA, a drop-in upgrade retaining the exact bore, stroke, port, and CA pivot mounting.
This SKU lacks a magnet, meaning it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the MBL replacement features a riveted rolling-packed body. Both rely on a fixed rubber bumper for end-of-stroke damping rather than an adjustable cushion.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X350-CA |
| Bore size | Ø25 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X350-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X350-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×350 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA Is Used
Carton Flap Folding
Drives a 350 mm swing arm to fold corrugated cardboard flaps on packaging lines, utilizing the CA pivot clevis to accommodate the arcing motion of the arm.
Vertical Parts Ejection
Pushes light plastic moldings out of a 25 mm bore fixture, providing 245 N of force at 0.5 MPa to reliably clear thin-walled components.
Textile Guide Rod
Cycles a yarn guide carriage across a 350 mm path, where the self-lubricating front-cover bearing guide ensures smooth operation without external grease.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA with MBL25X350-CA
To replace the MAL25X350-CA, order the MBL25X350-CA. Confirm your 25 mm bore, 350 mm stroke, G1/8 port, and PT thread form. The CA back cover provides a pivot clevis that swings on a pin to absorb arcing loads. If you need position sensing, you must step up to an -S designated MBL model, which uses the current CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
For sizing flexibility, stepping down to the 20 mm bore yields 157 N push at 0.5 MPa, while stepping up to the 32 mm bore provides 402 N. A plain cylinder does not hold its load when air pressure is lost; the rod drifts, so add an external rod lock for vertical loads. At 350 mm, the 10 mm rod has low side-load tolerance, requiring an external guide rail to prevent bending. If your application needs adjustable end-cushioning, switch to the MBLC variant on the current line, as the MAL bumper is fixed.
Upgrade checklist
- ✓ Order the MBL25X350-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X350-CA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA FAQ
Yes, the MAL25X350-CA is discontinued. The exact drop-in replacement is the MBL25X350-CA, which matches the 25 mm bore, 350 mm stroke, G1/8 port, and CA pivot. The MBL upgrades the body to a riveted rolling-packed design instead of the original threaded covers.
The 25 mm bore provides 245 N push and 206 N pull at 0.5 MPa, 343 N push at 0.7 MPa, and a maximum theoretical force of 50 kgf at 1.0 MPa. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X350-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350-CA → MBL25X350-CA)
Tell us the quantity and destination — we quote the drop-in MBL25X350-CA replacement with price, stock and lead time, usually within 7-8 hours.