This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X350CAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X350CAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 350mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X350CAH, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X350CAH
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH
The AirTAC MAL25X350CAH is a discontinued double-acting aluminum mini round cylinder with a 25mm bore and 350mm stroke. It delivers 245N of push force and 206N of pull force at 0.5MPa. The exact drop-in replacement is the MBL25X350CAH, matching the bore, stroke, output force, G1/8 port, and CA mounting.
This legacy MAL unit features threaded front and back covers, whereas the modern MBL uses a riveted rolling-packed body. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor. The bore uses a 10mm carbon-steel rod with 20um hard chrome plating and a heterogeneous two-way seal that retains grease for long service life.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X350CAH |
| Bore size | Ø25 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X350CAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X350CAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×350 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH Is Used
Textile Loom Guide
Drives a 350mm stroke yarn guide mechanism across a weaving loom, using the 245N push force to shift the carriage while the CA clevis absorbs lateral arc.
Pallet Transfer Arm
Actuates a 25mm bore sorting flap on a compact packaging conveyor, relying on the 206N pull force to retract the arm clear of passing cartons.
Drawer Ejector
Pushes a loaded parts tray out of a tight assembly station, utilizing the full 350mm travel to reach the operator safely.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH with MBL25X350CAH
To replace the MAL25X350CAH, order the MBL25X350CAH. Confirm your PT thread, CA pivot back cover, and 350mm stroke. If you need to adjust the bore, stepping down to the 20mm bore yields 157N push at 0.5MPa, while stepping up to the 32mm bore provides 402N push. At 350mm, the 10mm rod is highly susceptible to bending under side loads; use the CA clevis to allow arcing movement or add an external guide rail. Note that this cylinder has no -S magnet, so position sensing is impossible without a new MBL-S model and CMSG/DMSG/EMSG switches. The fixed rubber bumper softens end-of-stroke impact but does not lock the rod; if air is lost, the load drifts. For adjustable air cushioning, look to the MBLC variant.
Upgrade checklist
- ✓ Order the MBL25X350CAH (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X350CAH instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH FAQ
Yes, the MAL25X350CAH is discontinued. The exact drop-in replacement is the MBL25X350CAH, offering identical bore, stroke, force, port, and CA mounting. The new MBL body uses a riveted rolling-packed design instead of threaded covers.
At 0.5MPa it provides 245N push and 206N pull; at 0.7MPa it provides 343N push, with a maximum theoretical force of 50kgf at 1.0MPa. This specific SKU has no -S magnet, meaning it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X350CAH replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X350CAH → MBL25X350CAH)
Tell us the quantity and destination — we quote the drop-in MBL25X350CAH replacement with price, stock and lead time, usually within 7-8 hours.