This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X375SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X375SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 375mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X375SCA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke375 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X375SCA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA
The AirTAC MAL25X375SCA is a discontinued double-acting aluminum mini round cylinder with a 25mm bore and 375mm stroke. It delivers 245N of push force and 206N of pull force at 0.5 MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. AirTAC replaced this legacy unit with the MBL25X375SCA, a drop-in alternative retaining the exact bore, stroke, output force, port size, and CA pivot mounting for seamless integration.
This specific SKU includes a built-in magnet (-S) and a CA pivot clevis back cover. The original MAL body relied on threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Furthermore, the -S magnet on this discontinued unit functions with older CS1-M and DS1-M reed switches; upgrading to the MBL25X375SCA requires transitioning to current CMSG, DMSG, or EMSG solid-state sensors. The internal piston employs a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X375SCA |
| Bore size | Ø25 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X375SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X375SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×375 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA Is Used
Textile Loom Guide
Drives a thread guide arm across a 375mm path, utilizing the 245N push force at 0.5 MPa to tension and shift weaving patterns smoothly.
Pallet Divert Arm
Actuates a routing flap on a compact packaging conveyor, where the CA pivot clevis accommodates the arcing motion needed to redirect small cartons.
Vertical Tray Elevator
Lifts lightweight component trays in an electronics assembly cell; the 206N pull force reliably retracts the 10mm rod against the empty tray weight.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA with MBL25X375SCA
To replace the MAL25X375SCA, order the MBL25X375SCA, ensuring you keep the CA pivot back cover and PT thread form. Because this SKU features the -S magnet, remember that your existing CS1-M or DS1-M switches must be swapped for CMSG, DMSG, or EMSG sensors on the new MBL. The cylinder relies on a fixed rubber bumper for end-of-stroke impact absorption; if your application requires adjustable air cushioning, step up to the MBLC variant on the current product line.
With a 375mm stroke on a 10mm rod, side-load tolerance is minimal; always use an external guide rail or the CA pivot bracket to prevent rod bending. If you need to adjust sizing, stepping down to the 20mm bore yields 157N push at 0.5 MPa, while stepping up to the 32mm bore provides 402N push at 0.5 MPa. Note that a plain MAL or MBL cylinder does not hold its position when air pressure is lost; the rod will drift. Use an external pilot-operated check valve or rod lock for fail-safe load holding.
Upgrade checklist
- ✓ Order the MBL25X375SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X375SCA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA FAQ
Yes, the MAL25X375SCA is discontinued. The exact drop-in replacement is the MBL25X375SCA, which matches the 25mm bore, 375mm stroke, CA pivot back cover, and G1/8 port. You must upgrade your sensors, as the older CS1-M/DS1-M switches are replaced by CMSG/DMSG/EMSG sensors on the MBL.
The 25mm bore uses a G1/8 port and an M10x1.25 rod thread. At 0.5 MPa it provides 245N push and 206N pull force; at 0.7 MPa it provides 343N push. The maximum theoretical force is 50 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X375SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X375SCA → MBL25X375SCA)
Tell us the quantity and destination — we quote the drop-in MBL25X375SCA replacement with price, stock and lead time, usually within 7-8 hours.