This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X530CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X530CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 530mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X530CA, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke530 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X530CA
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA
The AirTAC MAL25X530CA is a discontinued compact double-acting aluminum mini round cylinder with a 25mm bore and a 530mm stroke. Because 530mm exceeds the 500mm standard limit, this is a non-standard, made-to-order length. It delivers 245N of push force and 206N of pull force at 0.5 MPa. AirTAC replaced the MAL series with the MBL line, making the MBL25X530CA the exact drop-in replacement. It shares the same bore, stroke, force, G1/8 port, and CA pivot mounting.
This legacy unit features a CA pivot clevis back cover designed to swing on a pin for arcing loads, which is critical for a 530mm rod. The original MAL body uses threaded front and back covers, whereas the MBL replacement uses a riveted rolling-packed body. Since this specific SKU lacks an -S magnet, it cannot accept a position sensor. Additionally, the rod relies on a heterogeneous two-way grease-retaining seal and a self-lubricating front-cover bearing guide to minimize friction.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X530CA |
| Bore size | Ø25 mm |
| Stroke | 530 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X530CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X530CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×530 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA Is Used
Textile Loom Guide
Handles the 245N push at 0.5 MPa needed to shift heavy yarn guides across a 530mm path, using the CA pivot to absorb rod arc.
Packaging Diverter Arm
Swings a sorting gate for heavy cardboard boxes on a packaging line, relying on the 206N pull force and clevis mounting for smooth arcing motion.
Warehouse Tray Pusher
Ejects loaded pallet trays from tight storage racks, utilizing the full 530mm stroke while the self-lubricating bearing prevents rod binding.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA with MBL25X530CA
To replace this MAL with the MBL25X530CA, confirm your 25mm bore, 530mm stroke, G1/8 port, and PT thread form. The CA pivot back cover transfers directly to the new MBL. Because this SKU has no -S magnet, it cannot support a position sensor; if you need sensing on the MBL, add the -S option, which uses the current CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M. If you need to step down, the 20mm bore offers 157N push at 0.5 MPa; stepping up to the 32mm bore yields 402N push at 0.5 MPa.
At 530mm, the 10mm rod is highly susceptible to bending under side loads. Use the CA clevis to allow self-alignment, or add an external guide rail. The fixed rubber bumper softens end-of-stroke impacts but does not lock the rod; if air is lost, the load drifts. For adjustable air cushioning, specify the MBLC variant on the current line.
Upgrade checklist
- ✓ Order the MBL25X530CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X530CA instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL25X530CA, which matches the 25mm bore, 530mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted rolling-packed body instead of the threaded covers found on the MAL.
At 0.5 MPa, it provides 245N push and 206N pull force; at 0.7 MPa, push is 343N. The maximum theoretical force is 50 kgf at 1.0 MPa. Because this SKU lacks the -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X530CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X530CA → MBL25X530CA)
Tell us the quantity and destination — we quote the drop-in MBL25X530CA replacement with price, stock and lead time, usually within 7-8 hours.