This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL25X70SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL25X70SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM
The AirTAC Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM is a double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 70mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL25X70SCM, which matches its bore, stroke, force and mounting.
- BoreØ25 mm
- Stroke70 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL25X70SCM
About the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM
The AirTAC MAL25X70SCM is a discontinued double-acting aluminum mini round cylinder. It delivers 245 N of push force and 206 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL25X70SCM, matching the 25 mm bore, 70 mm stroke, G1/8 port, and CM round-end back cover. The legacy MAL features a threaded front and rear cover assembly, whereas the current MBL utilizes a riveted rolling-packed body for equally robust performance.
This specific SKU includes a built-in magnet (-S) for position sensing. On the MAL, this magnet interfaces with the older CS1-M or DS1-M reed switches, but the MBL replacement upgrades you to the modern CMSG, DMSG, or EMSG sensor families. Internally, the piston relies on a heterogeneous two-way seal that retains lubricating grease, running against a carbon-steel rod with 20 um hard-chrome plating.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM Technical Specifications
| Model | Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL25X70SCM |
| Bore size | Ø25 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL25X70SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
The MBL25X70SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×70 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM Is Used
PCB Depaneling Router
Provides 245 N of push at 0.5 MPa to plunge a router bit into assembled circuit panels, using the 70 mm stroke to clear the spindle during tool changes.
Connector Insertion Press
Drives a 25 mm bore pin into a socket with 343 N of force at 0.7 MPa, relying on the -S magnet to confirm full seating before the controller indexes.
Carton Flap Folder
Actuates a mechanical folding arm on a packaging line, where the lightweight aluminum body and round-end CM cover allow compact pivot mounting in tight spaces.
Replacing the Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM with MBL25X70SCM
To replace this MAL25X70SCM, order the MBL25X70SCM. It is a true drop-in fit: keep the 25 mm bore, 70 mm stroke, PT thread form, and CM round-end back cover. Because your SKU has the -S magnet, note that your existing CS1-M or DS1-M switches should be upgraded to the current CMSG, DMSG, or EMSG sensors used by the MBL. If you need adjustable air cushioning at the end of stroke—which neither this MAL nor the standard MBL has due to a fixed rubber bumper—step up to the MBLC variant.
For sizing flexibility, stepping down to a 20 mm bore drops the output to 157 N push at 0.5 MPa, while stepping up to a 32 mm bore increases it to 402 N. The fixed rubber bumper softens impact but does not lock the rod; if your application must hold a vertical load without drifting when air is lost, add an external pilot-operated check valve or a dedicated rod lock.
Upgrade checklist
- ✓ Order the MBL25X70SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL25X70SCM instead of this discontinued model.
Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM FAQ
Yes, the MAL25X70SCM is discontinued. The exact drop-in replacement is the MBL25X70SCM, which matches the 25 mm bore, 70 mm stroke, G1/8 port, and CM round-end cover. The MBL uses a riveted rolling-packed body instead of threaded covers, and if your SKU has the -S magnet, you will need to upgrade from the old CS1-M / DS1-M switches to the current CMSG / DMSG / EMSG sensors.
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force increases to 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL25X70SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL25 Aluminum Alloy Mini Cylinder MAL25X70SCM → MBL25X70SCM)
Tell us the quantity and destination — we quote the drop-in MBL25X70SCM replacement with price, stock and lead time, usually within 7-8 hours.