This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM
The AirTAC MAL32X100-CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 100mm stroke. It delivers 402N push and 346N pull at 0.5 MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. AirTAC replaced this legacy unit with the MBL32X100-CM, a drop-in alternative retaining the exact bore, stroke, output force, port size, and CM round-end mounting.
This legacy MAL features threaded front and back covers, whereas the current MBL replacement uses a riveted rolling-packed body. Because this specific SKU lacks the -S suffix, it cannot accept a position sensor. Internally, the carbon-steel rod has 20 um hard-chrome plating and relies on a heterogeneous two-way seal that retains grease. The unit uses a fixed rubber bumper, so if your application requires an adjustable air cushion, you should step up to the MBLC variant on the modern line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100-CM |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM Is Used
PCB routing gate
Pivots a diverter arm on a conveyor routing printed circuit boards, using the 402N thrust at 0.5 MPa to push lightweight carriers laterally.
Pick-and-place Z-axis
Drives the vertical lift arm of a small pick-and-place head, moving 100mm to clear tall components during PCB population.
Carton flap folder
Actuates a folding mechanism on a compact packaging line, using the CM round-end to accommodate slight geometric misalignment while tucking flaps.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM with MBL32X100-CM
To replace the MAL32X100-CM, order the MBL32X100-CM. Verify your 32mm bore, 100mm stroke, G1/8 port, and PT tapered thread. You must keep the CM round-end back cover for your mounting geometry. Since this SKU has no -S magnet, it cannot support a CS1-M or DS1-M sensor; if you need position detection on the new MBL, add the -S suffix and upgrade to the current CMSG, DMSG, or EMSG switches. The plain bumper does not hold the load if air drops; for position holding, add an external rod lock or pilot-operated check valve. If 402N at 0.5 MPa is too much, step down to the 25mm bore offering 245N. If you need more force, step up to the 40mm bore providing 628N. At 100mm stroke, side-load risk is moderate, but the 12mm rod has low side-load tolerance, so keep the load axial or use an external guide.
Upgrade checklist
- ✓ Order the MBL32X100-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM FAQ
Yes, the MAL32X100-CM is discontinued. The exact drop-in replacement is the MBL32X100-CM, which matches the 32mm bore, 100mm stroke, G1/8 port, and CM round-end mounting. The MBL upgrades the body to a riveted rolling-packed design instead of threaded covers.
At 0.5 MPa it provides 402N push and 346N pull, 563N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Because this SKU lacks the -S magnet, it cannot accept a position sensor; the modern MBL with -S uses CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM → MBL32X100-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X100-CM replacement with price, stock and lead time, usually within 7-8 hours.