This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100-CM-H — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100-CM-H in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100-CM-H, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100-CM-H
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H
The AirTAC MAL32X100-CM-H is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 100mm stroke. It delivers 402N push and 346N pull at 0.5MPa, using a G1/8 port and an M10x1.25 rod thread. The exact drop-in replacement is the MBL32X100-CM-H, matching the bore, stroke, output force, port and mounting exactly.
This legacy SKU features a CM round-end back cover and lacks an -S magnet, meaning it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the current MBL upgrade features a riveted rolling-packed body. Both versions rely on a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100-CM-H |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100-CM-H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100-CM-H produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H Is Used
PCB Router Gate
Actuates a routing machine entry gate requiring 402N push at 0.5MPa to hold against moving panels.
Carton Flap Folder
Folds packaging flaps in tight spaces using the 100mm stroke and CM round-end pivot for arcing motion.
Chip Tray Ejector
Pushes populated test trays out of a tester bay, leveraging the 32mm bore's 346N pull force for retraction.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H with MBL32X100-CM-H
To replace the MAL32X100-CM-H, order the MBL32X100-CM-H. Confirm the 32mm bore, 100mm stroke, G1/8 port, PT thread, and CM round-end back cover are retained. Because this SKU lacks the -S magnet, it cannot support a position sensor; if you need position detection, step up to an MBL32X100S-CM-H and note the MBL uses current CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M. If you need an adjustable air cushion rather than a fixed rubber bumper, look to the MBLC line.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. Note that this plain cylinder does not hold its load when air is lost; the rod will drift, so use an external rod lock for vertical or gravity-loaded applications.
Upgrade checklist
- ✓ Order the MBL32X100-CM-H (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100-CM-H instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H FAQ
Yes, the MAL series is discontinued. The exact drop-in replacement is the MBL32X100-CM-H, which matches the 32mm bore, 100mm stroke, G1/8 port, and CM round-end mounting. The MBL uses a riveted body instead of threaded covers but offers identical performance.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa push is 563N with a maximum theoretical force of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; you would need an S-suffix model to use switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100-CM-H replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-CM-H → MBL32X100-CM-H)
Tell us the quantity and destination — we quote the drop-in MBL32X100-CM-H replacement with price, stock and lead time, usually within 7-8 hours.