This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100-S-CA-H — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100-S-CA-H in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100-S-CA-H, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100-S-CA-H
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H
The AirTAC MAL32X100-S-CA-H is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, utilizing a 12 mm carbon-steel rod with 20 um hard chrome plating. AirTAC replaced this legacy unit with the MBL32X100-S-CA-H, a true drop-in alternative retaining the exact 32 mm bore, 100 mm stroke, G1/8 port, and CA pivot mounting.
This SKU includes a built-in magnet (-S) for position sensing. The older MAL uses CS1-M or DS1-M switches, whereas the MBL replacement requires the current CMSG, DMSG, or EMSG sensor family. The original MAL features threaded front and back covers, while the newer MBL body uses a riveted rolling-packed construction. A fixed rubber bumper absorbs end-of-stroke impacts; it is not an adjustable cushion or a position lock.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100-S-CA-H |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100-S-CA-H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100-S-CA-H produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H Is Used
Textile Loom Guide
Shifts a 100 mm yarn guide arm with 402 N push force at 0.5 MPa, using the CA pivot to absorb the mechanism's arcing return motion.
Packaging Flap Folder
Actuates a 32 mm bore carton sealing flap at high speed, relying on the fixed rubber bumper to soften the 100 mm stroke end impact.
PCB Shuttle Diverter
Pushes lightweight circuit board trays using the -S magnet and a DS1-M switch to confirm the fully extended 100 mm position.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H with MBL32X100-S-CA-H
To replace the MAL32X100-S-CA-H, order the MBL32X100-S-CA-H. Verify your setup accommodates the CA pivot back cover, which swings on a pin to absorb arcing loads. If your application needs a smaller bore, the 25 mm neighbor provides 245 N push at 0.5 MPa. For higher force, step up to the 40 mm bore, which delivers 628 N push at 0.5 MPa and upgrades the port to G1/4. Because the 100 mm stroke is driven by a 12 mm rod, side-load tolerance is low; use an external guide rail to prevent rod bending. A plain bumper does not hold a load when air is lost, so add an external rod lock for safety. If you need an adjustable air cushion, select the MBLC variant on the current line.
Upgrade checklist
- ✓ Order the MBL32X100-S-CA-H (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100-S-CA-H instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H FAQ
Yes, the MAL32X100-S-CA-H is discontinued. The exact drop-in replacement is the MBL32X100-S-CA-H, which matches the 32 mm bore, 100 mm stroke, G1/8 port, and CA pivot mount. You must upgrade your sensors from the old CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
At 0.5 MPa it provides 402 N push and 346 N pull force. At 0.7 MPa push increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Operating pressure is 0.1-1.0 MPa and speed ranges from 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100-S-CA-H replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA-H → MBL32X100-S-CA-H)
Tell us the quantity and destination — we quote the drop-in MBL32X100-S-CA-H replacement with price, stock and lead time, usually within 7-8 hours.