This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM
The AirTAC MAL32X100-S-CM is a discontinued double-acting aluminum mini round cylinder. It delivers a 402 N push force at 0.5 MPa through a 32 mm bore and 100 mm stroke. The exact drop-in replacement is the MBL32X100-S-CM, which matches the bore, stroke, output force, G1/8 port, and CM mounting exactly. This legacy model features a built-in magnet (-S) and a round-end back cover.
Two structural details stand out on this SKU. First, the original MAL uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for equally robust pressure containment. Second, the -S magnet on this legacy cylinder interfaces with older CS1-M or DS1-M reed switches; upgrading to the MBL means transitioning to the current CMSG, DMSG, or EMSG sensor families. The carbon-steel rod is plated with 20 um hard chrome and runs through a self-lubricating front-cover bearing guide.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100-S-CM |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM Is Used
PCB Depaneling Router
Provides the 402 N push at 0.5 MPa needed to clamp populated circuit boards during router cutting, utilizing the 100 mm stroke to clear tooling.
Bottling Line Diverter
Actuates a routing gate between packaging lanes, where the CM round-end back cover pivots smoothly to handle slight angular loads.
Carton Flap Folder
Drives a mechanical arm to tuck minor flaps on small shipping cartons, relying on the 32 mm bore for consistent force without crushing the board.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM with MBL32X100-S-CM
To replace the MAL32X100-S-CM, order the MBL32X100-S-CM. Confirm the 32 mm bore, 100 mm stroke, G1/8 port, and PT thread form are correct for your fittings. The CM round-end back cover must mate with your existing clevis or rod-end knuckle. Because this SKU includes the -S magnet, note that your legacy CS1-M and DS1-M switches will not fit the MBL body; you must update to CMSG, DMSG, or EMSG sensors.
For sizing, this 32 mm bore yields 402 N push and 346 N pull at 0.5 MPa. If you need less force, step down to the 25 mm bore (245 N push). If you need more power, step up to the 40 mm bore (628 N push). The MAL uses a fixed rubber bumper, not an adjustable cushion; if your application demands end-of-stroke deceleration, specify the MBLC variant on the current line. Remember that a plain cylinder does not hold position if air pressure drops. At 100 mm stroke, side-load risk is moderate, but ensure your CM pivot absorbs any arcing rod motion.
Upgrade checklist
- ✓ Order the MBL32X100-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM FAQ
Yes, the MAL32X100-S-CM is discontinued. The exact drop-in replacement is the MBL32X100-S-CM. It offers the same 32 mm bore, 100 mm stroke, output force, G1/8 port, and CM round-end mounting. You can swap it directly, but note that the -S magnet on the MBL requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. It operates on filtered air at 0.1-1.0 MPa with a speed range of 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CM → MBL32X100-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X100-S-CM replacement with price, stock and lead time, usually within 7-8 hours.