This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X1000-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X1000-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X1000-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X1000-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA
The AirTAC MAL32X1000-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 1000mm stroke. As a non-standard made-to-order stroke exceeding the 500mm maximum, it delivers 402N push and 346N pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X1000-CA, matching the bore, stroke, force, G1/8 port, and CA pivot mounting.
This legacy SKU features a CA pivot back cover that swings on a pin to absorb arcing loads, which is critical for a 1000mm stroke. Because this specific model lacks the -S magnet, it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Both share a fixed rubber bumper, but if you need an adjustable air cushion, you must step up to the MBLC variant on the current line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X1000-CA |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X1000-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X1000-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×1000 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA Is Used
Long-Reach Textile Guiding
Uses the 1000mm stroke and CA pivot to traverse yarn guides across a wide loom, relying on the 402N push force at 0.5 MPa to maintain tension.
Pallet Push-Off Station
Pushes empty pallets off a packaging line at 346N pull force, where the CA clevis allows the rod to arc safely as the pallet redirects.
High-Bay Tray Retrieval
Extends 1000mm into a dense storage rack to extract injection-molded trays, requiring an external guide to support the 12mm rod over this long distance.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA with MBL32X1000-CA
To replace this MAL, order the MBL32X1000-CA. Verify your 32mm bore, 1000mm stroke, PT thread, and CA pivot back cover. Since this SKU has no -S magnet, it cannot support a sensor; if you need position detection, order an MBL32X1000SCA and note that the modern MBL uses CMSG, DMSG, or EMSG switches instead of the legacy CS1-M or DS1-M. A plain cylinder does not hold its load when air is lost, so use an external rod lock for safety.
For sizing, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push. With a 1000mm stroke on a 12mm rod, side-load tolerance is very low; you must use an external guide rail or a pivot mount to prevent rod bending. The fixed rubber bumper softens end-of-stroke impact, but for heavy loads, consider the MBLC for adjustable air cushioning.
Upgrade checklist
- ✓ Order the MBL32X1000-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X1000-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA FAQ
Yes, the MAL32X1000-CA is discontinued. The exact drop-in replacement is the MBL32X1000-CA, offering the same 32mm bore, 1000mm stroke, CA pivot back cover, and G1/8 port. You must order the MBL32X1000-CA as the direct substitute.
At 0.5 MPa it provides 402N push and 346N pull force, 563N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; the MBL replacement with -S uses CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X1000-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-CA → MBL32X1000-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X1000-CA replacement with price, stock and lead time, usually within 7-8 hours.