This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X1000-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X1000-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X1000-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke1000 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X1000-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA
The AirTAC MAL32X1000-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and a 1000 mm made-to-order stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, peaking at 82 kgf at 1.0 MPa. AirTAC replaced this legacy unit with the MBL32X1000-S-CA, a drop-in upgrade retaining the exact bore, stroke, G1/8 port, M10x1.25 rod thread, and CA pivot back cover.
This legacy SKU features a built-in -S magnet for position detection with older CS1-M or DS1-M reed switches. The modern MBL replacement shifts to CMSG, DMSG, or EMSG sensors. The original MAL body relied on threaded front and back covers, whereas the MBL uses a riveted rolling-packed body for equal pressure ratings. A fixed rubber bumper absorbs end-of-stroke impact, but it cannot hold a load if air pressure drops.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X1000-S-CA |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X1000-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X1000-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×1000 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA Is Used
Textile Loom Beam Indexing
Drives a 1000 mm carriage on a weaving loom, using the CA pivot to absorb arcing loads while providing 402 N of push force at 0.5 MPa to shift heavy warp beams.
Pallet Sorting Diverter
Extends a full meter to route wooden pallets on a packaging line, where the fixed rubber bumper softens the abrupt stops demanded by high-speed sorting.
PCB Panel Conveyor Transfer
Moves printed circuit board panels across a 1-meter gap between machines, utilizing the -S magnet and CS1-M switches to confirm the extended transfer position.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA with MBL32X1000-S-CA
To replace the MAL32X1000-S-CA, order the MBL32X1000-S-CA. Confirm the 32 mm bore, 1000 mm non-standard stroke, G1/8 port, PT thread, and CA pivot back cover are retained. Because this unit has the -S magnet, you must upgrade your sensing setup: the legacy CS1-M and DS1-M switches are replaced by CMSG, DMSG, or EMSG sensors on the MBL. If your application requires adjustable end-cushioning instead of the fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. A 1000 mm stroke on a 12 mm rod creates a severe side-load and rod-bending risk; you must use an external guide rail or rely on the CA clevis to pivot freely. Remember that neither the MAL nor the MBL holds position unpowered—add an external rod lock or pilot-operated check valve for safety.
Upgrade checklist
- ✓ Order the MBL32X1000-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X1000-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA FAQ
Yes, the MAL32X1000-S-CA is discontinued. The exact drop-in replacement is the MBL32X1000-S-CA, matching the 32 mm bore, 1000 mm stroke, G1/8 port, and CA pivot. The MBL uses a riveted body instead of threaded covers and requires CMSG, DMSG, or EMSG sensors instead of the old CS1-M or DS1-M switches.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The 1000 mm stroke exceeds the 500 mm standard maximum, making it a non-standard, made-to-order stroke that requires external side-load guidance due to the 12 mm rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X1000-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X1000-S-CA → MBL32X1000-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X1000-S-CA replacement with price, stock and lead time, usually within 7-8 hours.