This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100SCMLB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100SCMLB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100SCMLB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100SCMLB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB
The AirTAC MAL32X100SCMLB is a discontinued double-acting mini round cylinder featuring a 32mm bore and 100mm stroke. It delivers 402N push and 346N pull at 0.5MPa, with a Ø12mm carbon-steel rod. AirTAC replaced this legacy unit with the MBL32X100SCMLB, a drop-in alternative retaining the same force, G1/8 port, and LB foot mounting. The MBL upgrades the threaded front and back covers to a riveted rolling-packed body for enhanced structural integrity.
This specific SKU includes the -S magnet for position sensing. On the MAL, the magnet interfaces with legacy CS1-M or DS1-M switches, whereas the MBL replacement transitions to the current CMSG, DMSG, and EMSG sensor families. The internal piston relies on a heterogeneous two-way seal that retains grease, while a self-lubricating bearing guide in the front cover minimizes friction across the 30-800mm/s speed range.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100SCMLB |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100SCMLB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100SCMLB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB Is Used
PCB Router Z-Axis
Drives a 100mm vertical plunge for a PCB depaneling router, utilizing the 402N push at 0.5MPa to cleanly shear fr4 material within a compact electronics assembly cell.
Pouch Sealing Jaw
Actuates a 100mm stroke sealing jaw on a vertical form-fill-seal packaging line, where the LB foot mount rigidly anchors the cylinder against side-load from film tension.
Bin Diverter Gate
Pushes a lightweight aluminum diverter flap across a 100mm gap to route small plastic parts into sorting bins, relying on the CM round-end cover for compact rear clearance.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB with MBL32X100SCMLB
To replace the MAL32X100SCMLB, order the MBL32X100SCMLB. Verify your 32mm bore, 100mm stroke, G1/8 port, and PT tapered thread. This unit features a CM round-end back cover and an LB foot mounting bracket for rigid base fastening. If your cycle generates high end-impact, note that the MAL uses a fixed rubber bumper; for an adjustable air cushion, step up to the current-line MBLC32 variant.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. Because this is a 100mm stroke, the 12mm rod has limited side-load tolerance; ensure linear motion or use an external guide. A plain cylinder does not hold a load when air is lost, so add a pilot-operated check valve if position retention is required.
Upgrade checklist
- ✓ Order the MBL32X100SCMLB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100SCMLB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB FAQ
Yes, the MAL32X100SCMLB is discontinued. The exact drop-in replacement is the MBL32X100SCMLB, which matches the 32mm bore, 100mm stroke, G1/8 port, and LB mounting. The MBL upgrades the body to a riveted rolling-packed design and requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N, with a maximum theoretical force of 82kgf at 1.0MPa. Because this SKU includes the -S magnet, it supports position sensing via CS1-M or DS1-M switches on the MAL, which upgrade to the CMSG, DMSG, or EMSG families on the MBL replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100SCMLB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100SCMLB → MBL32X100SCMLB)
Tell us the quantity and destination — we quote the drop-in MBL32X100SCMLB replacement with price, stock and lead time, usually within 7-8 hours.