This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X105CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X105CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X105CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke105 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X105CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA
The AirTAC MAL32X105CA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 105 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X105CA, a drop-in upgrade retaining the exact same bore, stroke, output force, G1/8 port, and CA pivot mounting for seamless installation.
This legacy SKU features a CA pivot clevis back cover designed to articulate on a pin, safely absorbing arcing loads throughout the rod arc. Unlike the older MAL body which uses threaded front and back covers, the modern MBL replacement utilizes a riveted rolling-packed body for structural rigidity. Because this specific configuration lacks an S designation, it has no internal magnet and cannot accept a position sensor.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X105CA |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X105CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X105CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×105 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA Is Used
Pivot-Arm Component Ejection
Leverages the CA clevis to swing a 402 N push force across an arc, reliably kicking finished aluminum brackets out of a CNC machining center.
Sorting Diverter Gate
Uses the 105 mm stroke to thrust a diverter blade on a packaging line, redirecting small cardboard cartons at 30-800 mm/s operating speeds.
PCB Test Fixture Lid
Cycles a 346 N pull force to lower and raise a testing probe lid over delicate circuit boards without requiring an internal position sensor.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA with MBL32X105CA
To replace the discontinued MAL32X105CA, order the MBL32X105CA. Verify your setup accommodates the G1/8 port and the default PT tapered thread form. The CA pivot back cover on this unit swings on a pin to absorb arcing loads; ensure your mating clevis is in good condition. Since this SKU lacks the S magnet option, it cannot support position sensing. If you require a sensor, you must transition to an MBL32X105SCA and upgrade to the current CMSG, DMSG, or EMSG switch family, as the older CS1-M and DS1-M sensors are obsolete.
For sizing flexibility, you can step down to a 25 mm bore (providing 245 N push at 0.5 MPa) for lighter loads, or step up to a 40 mm bore (delivering 628 N push at 0.5 MPa) if your application requires more power. The 105 mm stroke falls below the 300 mm side-load threshold, but the 12 mm carbon-steel rod with 20 um hard chrome plating still offers limited side-load tolerance. The fixed rubber bumper absorbs end-of-stroke impact but does not hold the load if air pressure drops; for position holding, install an external rod lock. If you need adjustable end-cushioning, look to the current MBLC variant, as the MAL only offers a fixed bumper.
Upgrade checklist
- ✓ Order the MBL32X105CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X105CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA FAQ
Yes, the MAL32X105CA is discontinued. The exact drop-in replacement is the MBL32X105CA, which matches the 32 mm bore, 105 mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted rolling-packed body instead of the older threaded covers, but maintains identical performance.
At 0.5 MPa, it provides 402 N push and 346 N pull force. At 0.7 MPa, push increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Because this specific SKU lacks the S magnet code, it cannot accept a position sensor; sensing requires an S-designated model using CS1-M or DS1-M switches on the MAL, or CMSG/DMSG/EMSG switches on the MBL.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X105CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X105CA → MBL32X105CA)
Tell us the quantity and destination — we quote the drop-in MBL32X105CA replacement with price, stock and lead time, usually within 7-8 hours.