This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X10SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X10SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X10SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X10SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA
The AirTAC MAL32X10SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 10mm stroke. It delivers 402N of push force at 0.5 MPa. The exact drop-in replacement is the MBL32X10SCA, which matches the bore, stroke, force, G1/8 port, and CA pivot mounting. The legacy MAL uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU includes a built-in magnet (-S) and a CA pivot back cover. The magnet enables position detection, but note that the older MAL works with CS1-M or DS1-M switches, while the MBL upgrade requires CMSG, DMSG, or EMSG sensors. The CA clevis allows the cylinder to swing on a pin, accommodating arcing movements, while the fixed rubber bumper absorbs end-of-stroke impacts without being an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X10SCA |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X10SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X10SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA Is Used
Textile Loom Guide
Drives a 10mm yarn guide arm on a textile loom, using the 402N push force and CA pivot to swing smoothly within a compact weaving machine frame.
Pouch Sealer Gate
Actuates a 10mm diverter gate on a vertical pouch sealing line, where the short stroke and CA clevis allow precise arcing motion in a tight packaging cell.
PCB Router Clamp
Applies 346N of pull force to hold a PCB routing fixture, using the -S magnet to confirm retraction via a CS1-M sensor before the spindle starts.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA with MBL32X10SCA
To replace the MAL32X10SCA, order the MBL32X10SCA and confirm the PT thread, CA pivot back cover, and magnet are retained. Because this is a 10mm short stroke, side-load stress is minimal. If you need a smaller bore, the 25mm neighbor provides 245N push at 0.5 MPa; if you need more force, the 40mm bore offers 628N. Remember that the fixed rubber bumper softens impacts but does not lock the rod—if air pressure drops, the load will drift and requires an external rod lock. For adjustable air cushioning, step up to the MBLC series on the current line.
Upgrade checklist
- ✓ Order the MBL32X10SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X10SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA FAQ
Yes, the MAL32X10SCA is discontinued. The exact drop-in replacement is the MBL32X10SCA, matching the 32mm bore, 10mm stroke, G1/8 port, CA pivot, and magnet. You must switch from the older CS1-M/DS1-M switches to the CMSG/DMSG/EMSG sensor family for the new body.
The 32mm bore delivers 402N push and 346N pull at 0.5 MPa. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0 MPa. It uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X10SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCA → MBL32X10SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X10SCA replacement with price, stock and lead time, usually within 7-8 hours.