This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X10SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X10SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X10SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X10SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM
The AirTAC MAL32X10SCM is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 10 mm stroke. It delivers 402 N of push force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X10SCM, a drop-in alternative that matches the exact bore, stroke, output force, G1/8 port, and CM round-end mounting interface.
This legacy SKU includes a built-in magnet (-S) for position sensing and a CM round-end back cover. The original MAL body used threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally robust performance. Because this unit carries the -S code, its magnet was designed for the older CS1-M and DS1-M reed switches; upgrading to the MBL means transitioning to the current CMSG, DMSG, or EMSG sensor families. The piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod has a 20 um hard-chrome plating to resist wear.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X10SCM |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X10SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X10SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM Is Used
PCB Router Ejector
Uses the 10 mm stroke to rapidly push singulated circuit boards out of a routing fixture, relying on 402 N of force to overcome vacuum grip.
Small Parts Diverter Gate
Actuates a short-stroke flap on a conveyor to sort small machined screws into reject bins without overshooting the tight space.
Carton Flap Tucker
Tucks the minor flaps of small packaging cartons prior to tape sealing, where the CM round-end allows slight alignment forgiveness.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM with MBL32X10SCM
To replace the MAL32X10SCM, order the MBL32X10SCM. Confirm your 32 mm bore, 10 mm stroke, G1/8 port, and PT thread form. You must also account for the CM round-end back cover and factor in the sensor change: the legacy -S magnet pairs with CS1-M or DS1-M switches, while the MBL requires CMSG, DMSG, or EMSG sensors. If your application requires an adjustable air cushion rather than the fixed rubber bumper found on this MAL, step up to the MBLC series.
When sizing, verify if 402 N of push at 0.5 MPa is optimal. Stepping down to a 25 mm bore yields 245 N of push, while stepping up to a 40 mm bore provides 628 N. Keep in mind that a plain cylinder does not hold its position if air pressure drops; the rod will drift. For securing a load, install an external rod lock or a pilot-operated check valve.
Upgrade checklist
- ✓ Order the MBL32X10SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X10SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM FAQ
Yes, the MAL32X10SCM is discontinued. The exact drop-in replacement is the MBL32X10SCM, which offers the same 32 mm bore, 10 mm stroke, G1/8 port, and CM round-end cover. Note that if you use the -S magnet for position detection, you must upgrade from the old CS1-M or DS1-M switches to the newer CMSG, DMSG, or EMSG sensors.
The 32 mm bore provides a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X10SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X10SCM → MBL32X10SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X10SCM replacement with price, stock and lead time, usually within 7-8 hours.